A photosensitive benzophenone tetracarboxylic dianhyride-alkylated diamine polyimide formulation has been evaluated for application in an optical interconnection area. The refractive-index patterns in this material were optically recorded by UV-assisted photodoping of sensitizers. The polyimide films were selectively doped with benzoin-type photosensitizers such as benzildimethylketal and benzoin ethyl ether, which cause a decrease in the refractive index. High-dose UV irradiation that causes cross linking of the polyimide chains was also employed for augmenting the refractive-index difference to 0.017 between the doped and undoped regions. Refractive-index variations and lightguiding properties were investigated as a function of doping concentrations and other processing conditions. The author utilized this technique for the fabrication of embedded polyimide channel waveguides. The two photosensitizers have different effects on the waveguiding characteristics of the polyimide films. Losses for benzoin ethyl ether remained low whereas doping with benzildimethylketal caused significant increase in the waveguiding loss at high doping concentrations. Near-field imaging of the output from such waveguides shows good confinement of 815-nm light.
© 1993 Optical Society of AmericaFull Article | PDF Article
OSA Recommended Articles
Appl. Opt. 23(16) 2729-2733 (1984)
L. Lévesque, B. E. Paton, and S. H. Payne
Appl. Opt. 33(34) 8036-8040 (1994)
H. Franke, D. Wagner, T. Kleckers, R. Reuter, H. V. Rohitkumar, and B. A. Blech
Appl. Opt. 32(16) 2927-2935 (1993)