Abstract

Terahertz (THz) optical materials containing polymeric materials have been useful for terahertz technologies. We investigated the THz optical properties of wood–plastic composites (WPCs), which are composed of polystyrene and wood powder, and their suitability as THz optical materials. We found that the refractive indexes and absorption coefficients of the WPCs increased with increasing wood powder content. WPCs are inexpensive and have tunable THz optical properties.

© 2020 Optical Society of America under the terms of the OSA Open Access Publishing Agreement

Full Article  |  PDF Article
OSA Recommended Articles
Terahertz optical material based on wood-plastic composites

Atsushi Nakanishi and Hironori Takahashi
Opt. Mater. Express 8(12) 3653-3658 (2018)

Terahertz birefringence and attenuation properties of wood and paper

Matthew Reid and R. Fedosejevs
Appl. Opt. 45(12) 2766-2772 (2006)

Terahertz plastic compound lenses

M. Wichmann, A. S. Mondol, N. Kocic, S. Lippert, T. Probst, M. Schwerdtfeger, S. Schumann, T. Hochrein, P. Heidemeyer, M. Bastian, G. Bastian, and M. Koch
Appl. Opt. 52(18) 4186-4191 (2013)

References

  • View by:
  • |
  • |
  • |

  1. M. Tonouchi, “Cutting-edge terahertz technology,” Nat. Photonics 1, 97–105 (2007).
    [Crossref]
  2. G. Takebe, Y. Kawada, K. Akiyama, H. Takahashi, H. Takamoto, and M. Hiramatsu, “Evaluation of drug crystallinity in aqueous suspension using terahertz time-domain attenuated total reflection spectroscopy,” J. Pharm. Sci. 102, 4065–4071 (2013).
    [Crossref]
  3. N. Greenall, A. Valavanis, H. J. Desai, D. O. Acheampong, L. H. Li, J. E. Cunningham, A. G. Davies, E. H. Linfield, and A. D. Burnett, “The development of a Semtex-H simulant for terahertz spectroscopy,” J. Infrared Millim. Terahertz Waves 38, 325–338 (2017).
    [Crossref]
  4. A. D. Squires, M. Kelly, and R. A. Lewis, “Terahertz analysis of quinacridone pigments,” J. Infrared Millim. Terahertz Waves 38, 314–324 (2017).
    [Crossref]
  5. A. D. Squires and R. A. Lewis, “Terahertz analysis of phthalocyanine pigments,” J. Infrared Millim. Terahertz Waves 40, 738–751 (2019).
    [Crossref]
  6. A. Nakanishi, Y. Kawada, T. Yasuda, K. Akiyama, and H. Takahashi, “Terahertz time domain attenuated total reflection spectroscopy with an integrated prism system,” Rev. Sci. Instrum. 83, 033103 (2012).
    [Crossref]
  7. M. Okano and S. Watanabe, “Internal status of visibly opaque black rubbers investigated by terahertz polarization spectroscopy: fundamentals and applications,” Polymers 11, 9 (2019).
    [Crossref]
  8. A. Nakanishi, K. Fujita, K. Horita, and H. Takahashi, “Terahertz imaging with room-temperature terahertz difference-frequency quantum-cascade laser sources,” Opt. Express 27, 1884–1893 (2019).
    [Crossref]
  9. B. Scherger, S. Wietzke, M. Scheller, N. Vieweg, M. Wichmann, M. Koch, and K. Wiesauer, “Characterization of micro-powders for fabrication of compression molded THz lenses,” J. Infrared Millim. Terahertz Waves 32, 943–951 (2011).
    [Crossref]
  10. M. Wichmann, A. S. Mondol, N. Kocic, S. Lippert, T. Probst, M. Schwerdtfeger, S. Schumann, T. Hochrein, P. Heidemeyer, M. Bastian, G. Bastian, and M. Koch, “Terahertz plastic compound lenses,” Appl. Opt. 52, 4186–4191 (2013).
    [Crossref]
  11. G. Xu, J. Zhang, X. Zang, O. Sugihara, H. Zhao, and B. Cai, “0.1–20  THz ultra-broadband perfect absorber via a flat multi-layer structure,” Opt. Express 24, 23177–23185 (2016).
    [Crossref]
  12. D.-S. Kim, D.-H. Kim, S. Hwang, and J.-H. Jang, “Broadband terahertz absorber realized by self-assembled multilayer glass spheres,” Opt. Express 20, 13566–13572 (2012).
    [Crossref]
  13. S. Islam, J. Stiens, G. Poesen, I. Jaeger, W. D. Raedt, and R. Vounckx, “Periodicity perturbed grounded frequency selective surface arrays as millimeter wave random phase coherence destroying diffusers,” J. Infrared Millim. Terahertz Waves 31, 641–648 (2010).
    [Crossref]
  14. A. Wojdyla and G. Gallot, “Brewster’s angle silicon wafer terahertz linear polarizer,” Opt. Express 19, 14099–14107 (2011).
    [Crossref]
  15. R. Xia, X. Jing, X. Gui, Y. Tian, and Z. Hong, “Broadband terahertz half-wave plate based on anisotropic polarization conversion metamaterials,” Opt. Mater. Express 7, 977–988 (2017).
    [Crossref]
  16. L. Wang, S. Ge, W. Hu, M. Nakajima, and Y. Lu, “Tunable reflective liquid crystal terahertz waveplates,” Opt. Mater. Express 7, 2023–2029 (2017).
    [Crossref]
  17. B. Cai, H. Chen, G. Xu, H. Zhao, and O. Sugihara, “Ultra-broadband THz antireflective coating with polymer composites,” Polymers 9, 574 (2017).
    [Crossref]
  18. W.-R. Ng, D. R. Golish, H. Xin, and M. E. Gehm, “Direct rapid-prototyping fabrication of computer-generated volume holograms in the millimeter-wave and terahertz regime,” Opt. Express 22, 3349–3355 (2014).
    [Crossref]
  19. S. F. Busch, M. Weidenbach, M. Fey, F. Schäfer, T. Probst, and M. Koch, “Optical properties of 3D printable plastics in the THz regime and their application for 3D printed THz optics,” J. Infrared Millim. Terahertz Waves 35, 993–997 (2014).
    [Crossref]
  20. A. D. Squires and R. A. Lewis, “Feasibility and characterization of common and exotic filaments for use in 3D printed terahertz device,” J. Infrared Millim. Terahertz Waves 39, 614–635 (2018).
    [Crossref]
  21. S. F. Busch, M. Weidenbach, J. C. Balzer, and M. Koch, “THz optics 3D printed with TOPAS,” J. Infrared Millim. Terahertz Waves 37, 303–307 (2016).
    [Crossref]
  22. A. D. Squires, E. Constable, and R. A. Lewis, “3D printed terahertz diffraction grating and lenses,” J. Infrared Millim. Terahertz Waves 36, 72–80 (2015).
    [Crossref]
  23. K. Szkudlarek, M. Sypek, G. Cywiński, J. Suszek, P. Zagrajek, A. Feduniewicz-Żmuda, I. Yahniuk, S. Yatsunenko, A. Nowakowska-Siwińska, D. Coquillat, D. B. But, M. Rachoń, K. Węgrzyńska, C. Skierbiszewski, and W. Knap, “Terahertz 3D printed diffractive lens matrices for field-effect transistor detector focal plane arrays,” Opt. Express 24, 20119–20131 (2016).
    [Crossref]
  24. J. Yang, J. Zhao, C. Gong, H. Tian, L. Sun, P. Chen, L. Lin, and W. Liu, “3D printed low-loss THz waveguide based on Kagome photonic crystal structure,” Opt. Express 24, 22454–22460 (2016).
    [Crossref]
  25. D. W. Vogt and R. Leonhardt, “3D-printed broadband dielectric tube terahertz waveguide with anti-reflection structure,” J. Infrared Millim. Terahertz Waves 37, 1086–1095 (2016).
    [Crossref]
  26. S. F. Busch, E. Castro-Camus, F. Beltran-Mejia, J. C. Balzer, and M. Koch, “3D printed prisms with tunable dispersion for the THz frequency range,” J. Infrared Millim. Terahertz Waves 39, 553–560 (2018).
    [Crossref]
  27. A. I. Hernandez-Serrano and E. Castro-Camus, “Quasi-Wollaston-prism for terahertz frequencies fabricated by 3D printing,” J. Infrared Millim. Terahertz Waves 38, 567–573 (2017).
    [Crossref]
  28. M. Kariz, M. Sernek, M. Obućina, and M. K. Kuzman, “Effect of wood content in FDM filament on properties of 3D printed parts,” Mater. Today Commun. 14, 135–140 (2018).
    [Crossref]
  29. J. A. Colla, R. E. M. Vickers, M. Nancarrow, and R. A. Lewis, “3D printing metallized plastics as terahertz reflectors,” J. Infrared Millim. Terahertz Waves 40, 752–762 (2019).
    [Crossref]
  30. A. Nakanishi and H. Takahashi, “Terahertz optical material based on wood-plastic composites,” Opt. Mater. Express 8, 3653–3658 (2018).
    [Crossref]
  31. Y. C. Shen, P. F. Taday, and M. Pepper, “Elimination of scattering effects in spectral measurement of granulated materials using terahertz pulsed spectroscopy,” Appl. Phys. Lett. 92, 051103 (2008).
    [Crossref]

2019 (4)

A. D. Squires and R. A. Lewis, “Terahertz analysis of phthalocyanine pigments,” J. Infrared Millim. Terahertz Waves 40, 738–751 (2019).
[Crossref]

M. Okano and S. Watanabe, “Internal status of visibly opaque black rubbers investigated by terahertz polarization spectroscopy: fundamentals and applications,” Polymers 11, 9 (2019).
[Crossref]

A. Nakanishi, K. Fujita, K. Horita, and H. Takahashi, “Terahertz imaging with room-temperature terahertz difference-frequency quantum-cascade laser sources,” Opt. Express 27, 1884–1893 (2019).
[Crossref]

J. A. Colla, R. E. M. Vickers, M. Nancarrow, and R. A. Lewis, “3D printing metallized plastics as terahertz reflectors,” J. Infrared Millim. Terahertz Waves 40, 752–762 (2019).
[Crossref]

2018 (4)

A. Nakanishi and H. Takahashi, “Terahertz optical material based on wood-plastic composites,” Opt. Mater. Express 8, 3653–3658 (2018).
[Crossref]

S. F. Busch, E. Castro-Camus, F. Beltran-Mejia, J. C. Balzer, and M. Koch, “3D printed prisms with tunable dispersion for the THz frequency range,” J. Infrared Millim. Terahertz Waves 39, 553–560 (2018).
[Crossref]

A. D. Squires and R. A. Lewis, “Feasibility and characterization of common and exotic filaments for use in 3D printed terahertz device,” J. Infrared Millim. Terahertz Waves 39, 614–635 (2018).
[Crossref]

M. Kariz, M. Sernek, M. Obućina, and M. K. Kuzman, “Effect of wood content in FDM filament on properties of 3D printed parts,” Mater. Today Commun. 14, 135–140 (2018).
[Crossref]

2017 (6)

A. I. Hernandez-Serrano and E. Castro-Camus, “Quasi-Wollaston-prism for terahertz frequencies fabricated by 3D printing,” J. Infrared Millim. Terahertz Waves 38, 567–573 (2017).
[Crossref]

N. Greenall, A. Valavanis, H. J. Desai, D. O. Acheampong, L. H. Li, J. E. Cunningham, A. G. Davies, E. H. Linfield, and A. D. Burnett, “The development of a Semtex-H simulant for terahertz spectroscopy,” J. Infrared Millim. Terahertz Waves 38, 325–338 (2017).
[Crossref]

A. D. Squires, M. Kelly, and R. A. Lewis, “Terahertz analysis of quinacridone pigments,” J. Infrared Millim. Terahertz Waves 38, 314–324 (2017).
[Crossref]

R. Xia, X. Jing, X. Gui, Y. Tian, and Z. Hong, “Broadband terahertz half-wave plate based on anisotropic polarization conversion metamaterials,” Opt. Mater. Express 7, 977–988 (2017).
[Crossref]

L. Wang, S. Ge, W. Hu, M. Nakajima, and Y. Lu, “Tunable reflective liquid crystal terahertz waveplates,” Opt. Mater. Express 7, 2023–2029 (2017).
[Crossref]

B. Cai, H. Chen, G. Xu, H. Zhao, and O. Sugihara, “Ultra-broadband THz antireflective coating with polymer composites,” Polymers 9, 574 (2017).
[Crossref]

2016 (5)

2015 (1)

A. D. Squires, E. Constable, and R. A. Lewis, “3D printed terahertz diffraction grating and lenses,” J. Infrared Millim. Terahertz Waves 36, 72–80 (2015).
[Crossref]

2014 (2)

W.-R. Ng, D. R. Golish, H. Xin, and M. E. Gehm, “Direct rapid-prototyping fabrication of computer-generated volume holograms in the millimeter-wave and terahertz regime,” Opt. Express 22, 3349–3355 (2014).
[Crossref]

S. F. Busch, M. Weidenbach, M. Fey, F. Schäfer, T. Probst, and M. Koch, “Optical properties of 3D printable plastics in the THz regime and their application for 3D printed THz optics,” J. Infrared Millim. Terahertz Waves 35, 993–997 (2014).
[Crossref]

2013 (2)

M. Wichmann, A. S. Mondol, N. Kocic, S. Lippert, T. Probst, M. Schwerdtfeger, S. Schumann, T. Hochrein, P. Heidemeyer, M. Bastian, G. Bastian, and M. Koch, “Terahertz plastic compound lenses,” Appl. Opt. 52, 4186–4191 (2013).
[Crossref]

G. Takebe, Y. Kawada, K. Akiyama, H. Takahashi, H. Takamoto, and M. Hiramatsu, “Evaluation of drug crystallinity in aqueous suspension using terahertz time-domain attenuated total reflection spectroscopy,” J. Pharm. Sci. 102, 4065–4071 (2013).
[Crossref]

2012 (2)

A. Nakanishi, Y. Kawada, T. Yasuda, K. Akiyama, and H. Takahashi, “Terahertz time domain attenuated total reflection spectroscopy with an integrated prism system,” Rev. Sci. Instrum. 83, 033103 (2012).
[Crossref]

D.-S. Kim, D.-H. Kim, S. Hwang, and J.-H. Jang, “Broadband terahertz absorber realized by self-assembled multilayer glass spheres,” Opt. Express 20, 13566–13572 (2012).
[Crossref]

2011 (2)

A. Wojdyla and G. Gallot, “Brewster’s angle silicon wafer terahertz linear polarizer,” Opt. Express 19, 14099–14107 (2011).
[Crossref]

B. Scherger, S. Wietzke, M. Scheller, N. Vieweg, M. Wichmann, M. Koch, and K. Wiesauer, “Characterization of micro-powders for fabrication of compression molded THz lenses,” J. Infrared Millim. Terahertz Waves 32, 943–951 (2011).
[Crossref]

2010 (1)

S. Islam, J. Stiens, G. Poesen, I. Jaeger, W. D. Raedt, and R. Vounckx, “Periodicity perturbed grounded frequency selective surface arrays as millimeter wave random phase coherence destroying diffusers,” J. Infrared Millim. Terahertz Waves 31, 641–648 (2010).
[Crossref]

2008 (1)

Y. C. Shen, P. F. Taday, and M. Pepper, “Elimination of scattering effects in spectral measurement of granulated materials using terahertz pulsed spectroscopy,” Appl. Phys. Lett. 92, 051103 (2008).
[Crossref]

2007 (1)

M. Tonouchi, “Cutting-edge terahertz technology,” Nat. Photonics 1, 97–105 (2007).
[Crossref]

Acheampong, D. O.

N. Greenall, A. Valavanis, H. J. Desai, D. O. Acheampong, L. H. Li, J. E. Cunningham, A. G. Davies, E. H. Linfield, and A. D. Burnett, “The development of a Semtex-H simulant for terahertz spectroscopy,” J. Infrared Millim. Terahertz Waves 38, 325–338 (2017).
[Crossref]

Akiyama, K.

G. Takebe, Y. Kawada, K. Akiyama, H. Takahashi, H. Takamoto, and M. Hiramatsu, “Evaluation of drug crystallinity in aqueous suspension using terahertz time-domain attenuated total reflection spectroscopy,” J. Pharm. Sci. 102, 4065–4071 (2013).
[Crossref]

A. Nakanishi, Y. Kawada, T. Yasuda, K. Akiyama, and H. Takahashi, “Terahertz time domain attenuated total reflection spectroscopy with an integrated prism system,” Rev. Sci. Instrum. 83, 033103 (2012).
[Crossref]

Balzer, J. C.

S. F. Busch, E. Castro-Camus, F. Beltran-Mejia, J. C. Balzer, and M. Koch, “3D printed prisms with tunable dispersion for the THz frequency range,” J. Infrared Millim. Terahertz Waves 39, 553–560 (2018).
[Crossref]

S. F. Busch, M. Weidenbach, J. C. Balzer, and M. Koch, “THz optics 3D printed with TOPAS,” J. Infrared Millim. Terahertz Waves 37, 303–307 (2016).
[Crossref]

Bastian, G.

Bastian, M.

Beltran-Mejia, F.

S. F. Busch, E. Castro-Camus, F. Beltran-Mejia, J. C. Balzer, and M. Koch, “3D printed prisms with tunable dispersion for the THz frequency range,” J. Infrared Millim. Terahertz Waves 39, 553–560 (2018).
[Crossref]

Burnett, A. D.

N. Greenall, A. Valavanis, H. J. Desai, D. O. Acheampong, L. H. Li, J. E. Cunningham, A. G. Davies, E. H. Linfield, and A. D. Burnett, “The development of a Semtex-H simulant for terahertz spectroscopy,” J. Infrared Millim. Terahertz Waves 38, 325–338 (2017).
[Crossref]

Busch, S. F.

S. F. Busch, E. Castro-Camus, F. Beltran-Mejia, J. C. Balzer, and M. Koch, “3D printed prisms with tunable dispersion for the THz frequency range,” J. Infrared Millim. Terahertz Waves 39, 553–560 (2018).
[Crossref]

S. F. Busch, M. Weidenbach, J. C. Balzer, and M. Koch, “THz optics 3D printed with TOPAS,” J. Infrared Millim. Terahertz Waves 37, 303–307 (2016).
[Crossref]

S. F. Busch, M. Weidenbach, M. Fey, F. Schäfer, T. Probst, and M. Koch, “Optical properties of 3D printable plastics in the THz regime and their application for 3D printed THz optics,” J. Infrared Millim. Terahertz Waves 35, 993–997 (2014).
[Crossref]

But, D. B.

Cai, B.

B. Cai, H. Chen, G. Xu, H. Zhao, and O. Sugihara, “Ultra-broadband THz antireflective coating with polymer composites,” Polymers 9, 574 (2017).
[Crossref]

G. Xu, J. Zhang, X. Zang, O. Sugihara, H. Zhao, and B. Cai, “0.1–20  THz ultra-broadband perfect absorber via a flat multi-layer structure,” Opt. Express 24, 23177–23185 (2016).
[Crossref]

Castro-Camus, E.

S. F. Busch, E. Castro-Camus, F. Beltran-Mejia, J. C. Balzer, and M. Koch, “3D printed prisms with tunable dispersion for the THz frequency range,” J. Infrared Millim. Terahertz Waves 39, 553–560 (2018).
[Crossref]

A. I. Hernandez-Serrano and E. Castro-Camus, “Quasi-Wollaston-prism for terahertz frequencies fabricated by 3D printing,” J. Infrared Millim. Terahertz Waves 38, 567–573 (2017).
[Crossref]

Chen, H.

B. Cai, H. Chen, G. Xu, H. Zhao, and O. Sugihara, “Ultra-broadband THz antireflective coating with polymer composites,” Polymers 9, 574 (2017).
[Crossref]

Chen, P.

Colla, J. A.

J. A. Colla, R. E. M. Vickers, M. Nancarrow, and R. A. Lewis, “3D printing metallized plastics as terahertz reflectors,” J. Infrared Millim. Terahertz Waves 40, 752–762 (2019).
[Crossref]

Constable, E.

A. D. Squires, E. Constable, and R. A. Lewis, “3D printed terahertz diffraction grating and lenses,” J. Infrared Millim. Terahertz Waves 36, 72–80 (2015).
[Crossref]

Coquillat, D.

Cunningham, J. E.

N. Greenall, A. Valavanis, H. J. Desai, D. O. Acheampong, L. H. Li, J. E. Cunningham, A. G. Davies, E. H. Linfield, and A. D. Burnett, “The development of a Semtex-H simulant for terahertz spectroscopy,” J. Infrared Millim. Terahertz Waves 38, 325–338 (2017).
[Crossref]

Cywinski, G.

Davies, A. G.

N. Greenall, A. Valavanis, H. J. Desai, D. O. Acheampong, L. H. Li, J. E. Cunningham, A. G. Davies, E. H. Linfield, and A. D. Burnett, “The development of a Semtex-H simulant for terahertz spectroscopy,” J. Infrared Millim. Terahertz Waves 38, 325–338 (2017).
[Crossref]

Desai, H. J.

N. Greenall, A. Valavanis, H. J. Desai, D. O. Acheampong, L. H. Li, J. E. Cunningham, A. G. Davies, E. H. Linfield, and A. D. Burnett, “The development of a Semtex-H simulant for terahertz spectroscopy,” J. Infrared Millim. Terahertz Waves 38, 325–338 (2017).
[Crossref]

Feduniewicz-Zmuda, A.

Fey, M.

S. F. Busch, M. Weidenbach, M. Fey, F. Schäfer, T. Probst, and M. Koch, “Optical properties of 3D printable plastics in the THz regime and their application for 3D printed THz optics,” J. Infrared Millim. Terahertz Waves 35, 993–997 (2014).
[Crossref]

Fujita, K.

Gallot, G.

Ge, S.

Gehm, M. E.

Golish, D. R.

Gong, C.

Greenall, N.

N. Greenall, A. Valavanis, H. J. Desai, D. O. Acheampong, L. H. Li, J. E. Cunningham, A. G. Davies, E. H. Linfield, and A. D. Burnett, “The development of a Semtex-H simulant for terahertz spectroscopy,” J. Infrared Millim. Terahertz Waves 38, 325–338 (2017).
[Crossref]

Gui, X.

Heidemeyer, P.

Hernandez-Serrano, A. I.

A. I. Hernandez-Serrano and E. Castro-Camus, “Quasi-Wollaston-prism for terahertz frequencies fabricated by 3D printing,” J. Infrared Millim. Terahertz Waves 38, 567–573 (2017).
[Crossref]

Hiramatsu, M.

G. Takebe, Y. Kawada, K. Akiyama, H. Takahashi, H. Takamoto, and M. Hiramatsu, “Evaluation of drug crystallinity in aqueous suspension using terahertz time-domain attenuated total reflection spectroscopy,” J. Pharm. Sci. 102, 4065–4071 (2013).
[Crossref]

Hochrein, T.

Hong, Z.

Horita, K.

Hu, W.

Hwang, S.

Islam, S.

S. Islam, J. Stiens, G. Poesen, I. Jaeger, W. D. Raedt, and R. Vounckx, “Periodicity perturbed grounded frequency selective surface arrays as millimeter wave random phase coherence destroying diffusers,” J. Infrared Millim. Terahertz Waves 31, 641–648 (2010).
[Crossref]

Jaeger, I.

S. Islam, J. Stiens, G. Poesen, I. Jaeger, W. D. Raedt, and R. Vounckx, “Periodicity perturbed grounded frequency selective surface arrays as millimeter wave random phase coherence destroying diffusers,” J. Infrared Millim. Terahertz Waves 31, 641–648 (2010).
[Crossref]

Jang, J.-H.

Jing, X.

Kariz, M.

M. Kariz, M. Sernek, M. Obućina, and M. K. Kuzman, “Effect of wood content in FDM filament on properties of 3D printed parts,” Mater. Today Commun. 14, 135–140 (2018).
[Crossref]

Kawada, Y.

G. Takebe, Y. Kawada, K. Akiyama, H. Takahashi, H. Takamoto, and M. Hiramatsu, “Evaluation of drug crystallinity in aqueous suspension using terahertz time-domain attenuated total reflection spectroscopy,” J. Pharm. Sci. 102, 4065–4071 (2013).
[Crossref]

A. Nakanishi, Y. Kawada, T. Yasuda, K. Akiyama, and H. Takahashi, “Terahertz time domain attenuated total reflection spectroscopy with an integrated prism system,” Rev. Sci. Instrum. 83, 033103 (2012).
[Crossref]

Kelly, M.

A. D. Squires, M. Kelly, and R. A. Lewis, “Terahertz analysis of quinacridone pigments,” J. Infrared Millim. Terahertz Waves 38, 314–324 (2017).
[Crossref]

Kim, D.-H.

Kim, D.-S.

Knap, W.

Koch, M.

S. F. Busch, E. Castro-Camus, F. Beltran-Mejia, J. C. Balzer, and M. Koch, “3D printed prisms with tunable dispersion for the THz frequency range,” J. Infrared Millim. Terahertz Waves 39, 553–560 (2018).
[Crossref]

S. F. Busch, M. Weidenbach, J. C. Balzer, and M. Koch, “THz optics 3D printed with TOPAS,” J. Infrared Millim. Terahertz Waves 37, 303–307 (2016).
[Crossref]

S. F. Busch, M. Weidenbach, M. Fey, F. Schäfer, T. Probst, and M. Koch, “Optical properties of 3D printable plastics in the THz regime and their application for 3D printed THz optics,” J. Infrared Millim. Terahertz Waves 35, 993–997 (2014).
[Crossref]

M. Wichmann, A. S. Mondol, N. Kocic, S. Lippert, T. Probst, M. Schwerdtfeger, S. Schumann, T. Hochrein, P. Heidemeyer, M. Bastian, G. Bastian, and M. Koch, “Terahertz plastic compound lenses,” Appl. Opt. 52, 4186–4191 (2013).
[Crossref]

B. Scherger, S. Wietzke, M. Scheller, N. Vieweg, M. Wichmann, M. Koch, and K. Wiesauer, “Characterization of micro-powders for fabrication of compression molded THz lenses,” J. Infrared Millim. Terahertz Waves 32, 943–951 (2011).
[Crossref]

Kocic, N.

Kuzman, M. K.

M. Kariz, M. Sernek, M. Obućina, and M. K. Kuzman, “Effect of wood content in FDM filament on properties of 3D printed parts,” Mater. Today Commun. 14, 135–140 (2018).
[Crossref]

Leonhardt, R.

D. W. Vogt and R. Leonhardt, “3D-printed broadband dielectric tube terahertz waveguide with anti-reflection structure,” J. Infrared Millim. Terahertz Waves 37, 1086–1095 (2016).
[Crossref]

Lewis, R. A.

J. A. Colla, R. E. M. Vickers, M. Nancarrow, and R. A. Lewis, “3D printing metallized plastics as terahertz reflectors,” J. Infrared Millim. Terahertz Waves 40, 752–762 (2019).
[Crossref]

A. D. Squires and R. A. Lewis, “Terahertz analysis of phthalocyanine pigments,” J. Infrared Millim. Terahertz Waves 40, 738–751 (2019).
[Crossref]

A. D. Squires and R. A. Lewis, “Feasibility and characterization of common and exotic filaments for use in 3D printed terahertz device,” J. Infrared Millim. Terahertz Waves 39, 614–635 (2018).
[Crossref]

A. D. Squires, M. Kelly, and R. A. Lewis, “Terahertz analysis of quinacridone pigments,” J. Infrared Millim. Terahertz Waves 38, 314–324 (2017).
[Crossref]

A. D. Squires, E. Constable, and R. A. Lewis, “3D printed terahertz diffraction grating and lenses,” J. Infrared Millim. Terahertz Waves 36, 72–80 (2015).
[Crossref]

Li, L. H.

N. Greenall, A. Valavanis, H. J. Desai, D. O. Acheampong, L. H. Li, J. E. Cunningham, A. G. Davies, E. H. Linfield, and A. D. Burnett, “The development of a Semtex-H simulant for terahertz spectroscopy,” J. Infrared Millim. Terahertz Waves 38, 325–338 (2017).
[Crossref]

Lin, L.

Linfield, E. H.

N. Greenall, A. Valavanis, H. J. Desai, D. O. Acheampong, L. H. Li, J. E. Cunningham, A. G. Davies, E. H. Linfield, and A. D. Burnett, “The development of a Semtex-H simulant for terahertz spectroscopy,” J. Infrared Millim. Terahertz Waves 38, 325–338 (2017).
[Crossref]

Lippert, S.

Liu, W.

Lu, Y.

Mondol, A. S.

Nakajima, M.

Nakanishi, A.

Nancarrow, M.

J. A. Colla, R. E. M. Vickers, M. Nancarrow, and R. A. Lewis, “3D printing metallized plastics as terahertz reflectors,” J. Infrared Millim. Terahertz Waves 40, 752–762 (2019).
[Crossref]

Ng, W.-R.

Nowakowska-Siwinska, A.

Obucina, M.

M. Kariz, M. Sernek, M. Obućina, and M. K. Kuzman, “Effect of wood content in FDM filament on properties of 3D printed parts,” Mater. Today Commun. 14, 135–140 (2018).
[Crossref]

Okano, M.

M. Okano and S. Watanabe, “Internal status of visibly opaque black rubbers investigated by terahertz polarization spectroscopy: fundamentals and applications,” Polymers 11, 9 (2019).
[Crossref]

Pepper, M.

Y. C. Shen, P. F. Taday, and M. Pepper, “Elimination of scattering effects in spectral measurement of granulated materials using terahertz pulsed spectroscopy,” Appl. Phys. Lett. 92, 051103 (2008).
[Crossref]

Poesen, G.

S. Islam, J. Stiens, G. Poesen, I. Jaeger, W. D. Raedt, and R. Vounckx, “Periodicity perturbed grounded frequency selective surface arrays as millimeter wave random phase coherence destroying diffusers,” J. Infrared Millim. Terahertz Waves 31, 641–648 (2010).
[Crossref]

Probst, T.

S. F. Busch, M. Weidenbach, M. Fey, F. Schäfer, T. Probst, and M. Koch, “Optical properties of 3D printable plastics in the THz regime and their application for 3D printed THz optics,” J. Infrared Millim. Terahertz Waves 35, 993–997 (2014).
[Crossref]

M. Wichmann, A. S. Mondol, N. Kocic, S. Lippert, T. Probst, M. Schwerdtfeger, S. Schumann, T. Hochrein, P. Heidemeyer, M. Bastian, G. Bastian, and M. Koch, “Terahertz plastic compound lenses,” Appl. Opt. 52, 4186–4191 (2013).
[Crossref]

Rachon, M.

Raedt, W. D.

S. Islam, J. Stiens, G. Poesen, I. Jaeger, W. D. Raedt, and R. Vounckx, “Periodicity perturbed grounded frequency selective surface arrays as millimeter wave random phase coherence destroying diffusers,” J. Infrared Millim. Terahertz Waves 31, 641–648 (2010).
[Crossref]

Schäfer, F.

S. F. Busch, M. Weidenbach, M. Fey, F. Schäfer, T. Probst, and M. Koch, “Optical properties of 3D printable plastics in the THz regime and their application for 3D printed THz optics,” J. Infrared Millim. Terahertz Waves 35, 993–997 (2014).
[Crossref]

Scheller, M.

B. Scherger, S. Wietzke, M. Scheller, N. Vieweg, M. Wichmann, M. Koch, and K. Wiesauer, “Characterization of micro-powders for fabrication of compression molded THz lenses,” J. Infrared Millim. Terahertz Waves 32, 943–951 (2011).
[Crossref]

Scherger, B.

B. Scherger, S. Wietzke, M. Scheller, N. Vieweg, M. Wichmann, M. Koch, and K. Wiesauer, “Characterization of micro-powders for fabrication of compression molded THz lenses,” J. Infrared Millim. Terahertz Waves 32, 943–951 (2011).
[Crossref]

Schumann, S.

Schwerdtfeger, M.

Sernek, M.

M. Kariz, M. Sernek, M. Obućina, and M. K. Kuzman, “Effect of wood content in FDM filament on properties of 3D printed parts,” Mater. Today Commun. 14, 135–140 (2018).
[Crossref]

Shen, Y. C.

Y. C. Shen, P. F. Taday, and M. Pepper, “Elimination of scattering effects in spectral measurement of granulated materials using terahertz pulsed spectroscopy,” Appl. Phys. Lett. 92, 051103 (2008).
[Crossref]

Skierbiszewski, C.

Squires, A. D.

A. D. Squires and R. A. Lewis, “Terahertz analysis of phthalocyanine pigments,” J. Infrared Millim. Terahertz Waves 40, 738–751 (2019).
[Crossref]

A. D. Squires and R. A. Lewis, “Feasibility and characterization of common and exotic filaments for use in 3D printed terahertz device,” J. Infrared Millim. Terahertz Waves 39, 614–635 (2018).
[Crossref]

A. D. Squires, M. Kelly, and R. A. Lewis, “Terahertz analysis of quinacridone pigments,” J. Infrared Millim. Terahertz Waves 38, 314–324 (2017).
[Crossref]

A. D. Squires, E. Constable, and R. A. Lewis, “3D printed terahertz diffraction grating and lenses,” J. Infrared Millim. Terahertz Waves 36, 72–80 (2015).
[Crossref]

Stiens, J.

S. Islam, J. Stiens, G. Poesen, I. Jaeger, W. D. Raedt, and R. Vounckx, “Periodicity perturbed grounded frequency selective surface arrays as millimeter wave random phase coherence destroying diffusers,” J. Infrared Millim. Terahertz Waves 31, 641–648 (2010).
[Crossref]

Sugihara, O.

B. Cai, H. Chen, G. Xu, H. Zhao, and O. Sugihara, “Ultra-broadband THz antireflective coating with polymer composites,” Polymers 9, 574 (2017).
[Crossref]

G. Xu, J. Zhang, X. Zang, O. Sugihara, H. Zhao, and B. Cai, “0.1–20  THz ultra-broadband perfect absorber via a flat multi-layer structure,” Opt. Express 24, 23177–23185 (2016).
[Crossref]

Sun, L.

Suszek, J.

Sypek, M.

Szkudlarek, K.

Taday, P. F.

Y. C. Shen, P. F. Taday, and M. Pepper, “Elimination of scattering effects in spectral measurement of granulated materials using terahertz pulsed spectroscopy,” Appl. Phys. Lett. 92, 051103 (2008).
[Crossref]

Takahashi, H.

A. Nakanishi, K. Fujita, K. Horita, and H. Takahashi, “Terahertz imaging with room-temperature terahertz difference-frequency quantum-cascade laser sources,” Opt. Express 27, 1884–1893 (2019).
[Crossref]

A. Nakanishi and H. Takahashi, “Terahertz optical material based on wood-plastic composites,” Opt. Mater. Express 8, 3653–3658 (2018).
[Crossref]

G. Takebe, Y. Kawada, K. Akiyama, H. Takahashi, H. Takamoto, and M. Hiramatsu, “Evaluation of drug crystallinity in aqueous suspension using terahertz time-domain attenuated total reflection spectroscopy,” J. Pharm. Sci. 102, 4065–4071 (2013).
[Crossref]

A. Nakanishi, Y. Kawada, T. Yasuda, K. Akiyama, and H. Takahashi, “Terahertz time domain attenuated total reflection spectroscopy with an integrated prism system,” Rev. Sci. Instrum. 83, 033103 (2012).
[Crossref]

Takamoto, H.

G. Takebe, Y. Kawada, K. Akiyama, H. Takahashi, H. Takamoto, and M. Hiramatsu, “Evaluation of drug crystallinity in aqueous suspension using terahertz time-domain attenuated total reflection spectroscopy,” J. Pharm. Sci. 102, 4065–4071 (2013).
[Crossref]

Takebe, G.

G. Takebe, Y. Kawada, K. Akiyama, H. Takahashi, H. Takamoto, and M. Hiramatsu, “Evaluation of drug crystallinity in aqueous suspension using terahertz time-domain attenuated total reflection spectroscopy,” J. Pharm. Sci. 102, 4065–4071 (2013).
[Crossref]

Tian, H.

Tian, Y.

Tonouchi, M.

M. Tonouchi, “Cutting-edge terahertz technology,” Nat. Photonics 1, 97–105 (2007).
[Crossref]

Valavanis, A.

N. Greenall, A. Valavanis, H. J. Desai, D. O. Acheampong, L. H. Li, J. E. Cunningham, A. G. Davies, E. H. Linfield, and A. D. Burnett, “The development of a Semtex-H simulant for terahertz spectroscopy,” J. Infrared Millim. Terahertz Waves 38, 325–338 (2017).
[Crossref]

Vickers, R. E. M.

J. A. Colla, R. E. M. Vickers, M. Nancarrow, and R. A. Lewis, “3D printing metallized plastics as terahertz reflectors,” J. Infrared Millim. Terahertz Waves 40, 752–762 (2019).
[Crossref]

Vieweg, N.

B. Scherger, S. Wietzke, M. Scheller, N. Vieweg, M. Wichmann, M. Koch, and K. Wiesauer, “Characterization of micro-powders for fabrication of compression molded THz lenses,” J. Infrared Millim. Terahertz Waves 32, 943–951 (2011).
[Crossref]

Vogt, D. W.

D. W. Vogt and R. Leonhardt, “3D-printed broadband dielectric tube terahertz waveguide with anti-reflection structure,” J. Infrared Millim. Terahertz Waves 37, 1086–1095 (2016).
[Crossref]

Vounckx, R.

S. Islam, J. Stiens, G. Poesen, I. Jaeger, W. D. Raedt, and R. Vounckx, “Periodicity perturbed grounded frequency selective surface arrays as millimeter wave random phase coherence destroying diffusers,” J. Infrared Millim. Terahertz Waves 31, 641–648 (2010).
[Crossref]

Wang, L.

Watanabe, S.

M. Okano and S. Watanabe, “Internal status of visibly opaque black rubbers investigated by terahertz polarization spectroscopy: fundamentals and applications,” Polymers 11, 9 (2019).
[Crossref]

Wegrzynska, K.

Weidenbach, M.

S. F. Busch, M. Weidenbach, J. C. Balzer, and M. Koch, “THz optics 3D printed with TOPAS,” J. Infrared Millim. Terahertz Waves 37, 303–307 (2016).
[Crossref]

S. F. Busch, M. Weidenbach, M. Fey, F. Schäfer, T. Probst, and M. Koch, “Optical properties of 3D printable plastics in the THz regime and their application for 3D printed THz optics,” J. Infrared Millim. Terahertz Waves 35, 993–997 (2014).
[Crossref]

Wichmann, M.

M. Wichmann, A. S. Mondol, N. Kocic, S. Lippert, T. Probst, M. Schwerdtfeger, S. Schumann, T. Hochrein, P. Heidemeyer, M. Bastian, G. Bastian, and M. Koch, “Terahertz plastic compound lenses,” Appl. Opt. 52, 4186–4191 (2013).
[Crossref]

B. Scherger, S. Wietzke, M. Scheller, N. Vieweg, M. Wichmann, M. Koch, and K. Wiesauer, “Characterization of micro-powders for fabrication of compression molded THz lenses,” J. Infrared Millim. Terahertz Waves 32, 943–951 (2011).
[Crossref]

Wiesauer, K.

B. Scherger, S. Wietzke, M. Scheller, N. Vieweg, M. Wichmann, M. Koch, and K. Wiesauer, “Characterization of micro-powders for fabrication of compression molded THz lenses,” J. Infrared Millim. Terahertz Waves 32, 943–951 (2011).
[Crossref]

Wietzke, S.

B. Scherger, S. Wietzke, M. Scheller, N. Vieweg, M. Wichmann, M. Koch, and K. Wiesauer, “Characterization of micro-powders for fabrication of compression molded THz lenses,” J. Infrared Millim. Terahertz Waves 32, 943–951 (2011).
[Crossref]

Wojdyla, A.

Xia, R.

Xin, H.

Xu, G.

B. Cai, H. Chen, G. Xu, H. Zhao, and O. Sugihara, “Ultra-broadband THz antireflective coating with polymer composites,” Polymers 9, 574 (2017).
[Crossref]

G. Xu, J. Zhang, X. Zang, O. Sugihara, H. Zhao, and B. Cai, “0.1–20  THz ultra-broadband perfect absorber via a flat multi-layer structure,” Opt. Express 24, 23177–23185 (2016).
[Crossref]

Yahniuk, I.

Yang, J.

Yasuda, T.

A. Nakanishi, Y. Kawada, T. Yasuda, K. Akiyama, and H. Takahashi, “Terahertz time domain attenuated total reflection spectroscopy with an integrated prism system,” Rev. Sci. Instrum. 83, 033103 (2012).
[Crossref]

Yatsunenko, S.

Zagrajek, P.

Zang, X.

Zhang, J.

Zhao, H.

B. Cai, H. Chen, G. Xu, H. Zhao, and O. Sugihara, “Ultra-broadband THz antireflective coating with polymer composites,” Polymers 9, 574 (2017).
[Crossref]

G. Xu, J. Zhang, X. Zang, O. Sugihara, H. Zhao, and B. Cai, “0.1–20  THz ultra-broadband perfect absorber via a flat multi-layer structure,” Opt. Express 24, 23177–23185 (2016).
[Crossref]

Zhao, J.

Appl. Opt. (1)

Appl. Phys. Lett. (1)

Y. C. Shen, P. F. Taday, and M. Pepper, “Elimination of scattering effects in spectral measurement of granulated materials using terahertz pulsed spectroscopy,” Appl. Phys. Lett. 92, 051103 (2008).
[Crossref]

J. Infrared Millim. Terahertz Waves (13)

J. A. Colla, R. E. M. Vickers, M. Nancarrow, and R. A. Lewis, “3D printing metallized plastics as terahertz reflectors,” J. Infrared Millim. Terahertz Waves 40, 752–762 (2019).
[Crossref]

N. Greenall, A. Valavanis, H. J. Desai, D. O. Acheampong, L. H. Li, J. E. Cunningham, A. G. Davies, E. H. Linfield, and A. D. Burnett, “The development of a Semtex-H simulant for terahertz spectroscopy,” J. Infrared Millim. Terahertz Waves 38, 325–338 (2017).
[Crossref]

A. D. Squires, M. Kelly, and R. A. Lewis, “Terahertz analysis of quinacridone pigments,” J. Infrared Millim. Terahertz Waves 38, 314–324 (2017).
[Crossref]

A. D. Squires and R. A. Lewis, “Terahertz analysis of phthalocyanine pigments,” J. Infrared Millim. Terahertz Waves 40, 738–751 (2019).
[Crossref]

B. Scherger, S. Wietzke, M. Scheller, N. Vieweg, M. Wichmann, M. Koch, and K. Wiesauer, “Characterization of micro-powders for fabrication of compression molded THz lenses,” J. Infrared Millim. Terahertz Waves 32, 943–951 (2011).
[Crossref]

S. Islam, J. Stiens, G. Poesen, I. Jaeger, W. D. Raedt, and R. Vounckx, “Periodicity perturbed grounded frequency selective surface arrays as millimeter wave random phase coherence destroying diffusers,” J. Infrared Millim. Terahertz Waves 31, 641–648 (2010).
[Crossref]

S. F. Busch, M. Weidenbach, M. Fey, F. Schäfer, T. Probst, and M. Koch, “Optical properties of 3D printable plastics in the THz regime and their application for 3D printed THz optics,” J. Infrared Millim. Terahertz Waves 35, 993–997 (2014).
[Crossref]

A. D. Squires and R. A. Lewis, “Feasibility and characterization of common and exotic filaments for use in 3D printed terahertz device,” J. Infrared Millim. Terahertz Waves 39, 614–635 (2018).
[Crossref]

S. F. Busch, M. Weidenbach, J. C. Balzer, and M. Koch, “THz optics 3D printed with TOPAS,” J. Infrared Millim. Terahertz Waves 37, 303–307 (2016).
[Crossref]

A. D. Squires, E. Constable, and R. A. Lewis, “3D printed terahertz diffraction grating and lenses,” J. Infrared Millim. Terahertz Waves 36, 72–80 (2015).
[Crossref]

D. W. Vogt and R. Leonhardt, “3D-printed broadband dielectric tube terahertz waveguide with anti-reflection structure,” J. Infrared Millim. Terahertz Waves 37, 1086–1095 (2016).
[Crossref]

S. F. Busch, E. Castro-Camus, F. Beltran-Mejia, J. C. Balzer, and M. Koch, “3D printed prisms with tunable dispersion for the THz frequency range,” J. Infrared Millim. Terahertz Waves 39, 553–560 (2018).
[Crossref]

A. I. Hernandez-Serrano and E. Castro-Camus, “Quasi-Wollaston-prism for terahertz frequencies fabricated by 3D printing,” J. Infrared Millim. Terahertz Waves 38, 567–573 (2017).
[Crossref]

J. Pharm. Sci. (1)

G. Takebe, Y. Kawada, K. Akiyama, H. Takahashi, H. Takamoto, and M. Hiramatsu, “Evaluation of drug crystallinity in aqueous suspension using terahertz time-domain attenuated total reflection spectroscopy,” J. Pharm. Sci. 102, 4065–4071 (2013).
[Crossref]

Mater. Today Commun. (1)

M. Kariz, M. Sernek, M. Obućina, and M. K. Kuzman, “Effect of wood content in FDM filament on properties of 3D printed parts,” Mater. Today Commun. 14, 135–140 (2018).
[Crossref]

Nat. Photonics (1)

M. Tonouchi, “Cutting-edge terahertz technology,” Nat. Photonics 1, 97–105 (2007).
[Crossref]

Opt. Express (7)

A. Wojdyla and G. Gallot, “Brewster’s angle silicon wafer terahertz linear polarizer,” Opt. Express 19, 14099–14107 (2011).
[Crossref]

J. Yang, J. Zhao, C. Gong, H. Tian, L. Sun, P. Chen, L. Lin, and W. Liu, “3D printed low-loss THz waveguide based on Kagome photonic crystal structure,” Opt. Express 24, 22454–22460 (2016).
[Crossref]

W.-R. Ng, D. R. Golish, H. Xin, and M. E. Gehm, “Direct rapid-prototyping fabrication of computer-generated volume holograms in the millimeter-wave and terahertz regime,” Opt. Express 22, 3349–3355 (2014).
[Crossref]

K. Szkudlarek, M. Sypek, G. Cywiński, J. Suszek, P. Zagrajek, A. Feduniewicz-Żmuda, I. Yahniuk, S. Yatsunenko, A. Nowakowska-Siwińska, D. Coquillat, D. B. But, M. Rachoń, K. Węgrzyńska, C. Skierbiszewski, and W. Knap, “Terahertz 3D printed diffractive lens matrices for field-effect transistor detector focal plane arrays,” Opt. Express 24, 20119–20131 (2016).
[Crossref]

G. Xu, J. Zhang, X. Zang, O. Sugihara, H. Zhao, and B. Cai, “0.1–20  THz ultra-broadband perfect absorber via a flat multi-layer structure,” Opt. Express 24, 23177–23185 (2016).
[Crossref]

A. Nakanishi, K. Fujita, K. Horita, and H. Takahashi, “Terahertz imaging with room-temperature terahertz difference-frequency quantum-cascade laser sources,” Opt. Express 27, 1884–1893 (2019).
[Crossref]

D.-S. Kim, D.-H. Kim, S. Hwang, and J.-H. Jang, “Broadband terahertz absorber realized by self-assembled multilayer glass spheres,” Opt. Express 20, 13566–13572 (2012).
[Crossref]

Opt. Mater. Express (3)

Polymers (2)

B. Cai, H. Chen, G. Xu, H. Zhao, and O. Sugihara, “Ultra-broadband THz antireflective coating with polymer composites,” Polymers 9, 574 (2017).
[Crossref]

M. Okano and S. Watanabe, “Internal status of visibly opaque black rubbers investigated by terahertz polarization spectroscopy: fundamentals and applications,” Polymers 11, 9 (2019).
[Crossref]

Rev. Sci. Instrum. (1)

A. Nakanishi, Y. Kawada, T. Yasuda, K. Akiyama, and H. Takahashi, “Terahertz time domain attenuated total reflection spectroscopy with an integrated prism system,” Rev. Sci. Instrum. 83, 033103 (2012).
[Crossref]

Cited By

OSA participates in Crossref's Cited-By Linking service. Citing articles from OSA journals and other participating publishers are listed here.

Alert me when this article is cited.


Figures (7)

Fig. 1.
Fig. 1. Photographs of WPC samples. (a) WPC made of PS and (b) WPC made of PP.
Fig. 2.
Fig. 2. Schematic representation of the transmission measurement of WPC samples. (a) Vertical polarization; (b) horizontal polarization.
Fig. 3.
Fig. 3. Optical properties of several WPCs having different wood powder contents (PP). (a) Refractive index and (b) absorption coefficient.
Fig. 4.
Fig. 4. Optical properties of several WPCs having different wood powder contents (PS). (a) Refractive index and (b) absorption coefficient.
Fig. 5.
Fig. 5. Photograph of wood powder obtained by laser scanning microscopy.
Fig. 6.
Fig. 6. Optical properties of several WPCs having different wood powder contents (PP) with vertical polarization (see above) and horizontal polarization: (a) refractive index, and (b) absorption coefficient.
Fig. 7.
Fig. 7. Optical properties of several WPCs having different wood powder contents (PS) with vertical polarization (see above) and horizontal polarization: (a) refractive index, and (b) absorption coefficient.

Tables (2)

Tables Icon

Table 1. Water Contents of Samples Having Different Wood Powder Contents (PS)

Tables Icon

Table 2. Water Contents of Samples Having Different Wood Powder Contents (PP)

Metrics