Abstract

An electrically pumped InAs/GaAs quantum dot laser on a Si substrate has been demonstrated. The double-hetero laser structure was grown on a GaAs substrate by metal-organic chemical vapor deposition and layer-transferred onto a Si substrate by GaAs/Si wafer bonding mediated by a 380-nm-thick Au-Ge-Ni alloy layer. This broad-area Fabry-Perot laser exhibits InAs quantum dot ground state lasing at 1.31 μm at room temperature with a threshold current density of 600 A/cm2.

©2010 Optical Society of America

Full Article  |  PDF Article
OSA Recommended Articles
1.3-μm InAs/GaAs quantum-dot lasers monolithically grown on Si substrates

Ting Wang, Huiyun Liu, Andrew Lee, Francesca Pozzi, and Alwyn Seeds
Opt. Express 19(12) 11381-11386 (2011)

Electrically pumped continuous-wave 1.3 µm InAs/GaAs quantum dot lasers monolithically grown on on-axis Si (001) substrates

Siming Chen, Mengya Liao, Mingchu Tang, Jiang Wu, Mickael Martin, Thierry Baron, Alwyn Seeds, and Huiyun Liu
Opt. Express 25(5) 4632-4639 (2017)

1.3-μm InAs/GaAs quantum-dot lasers monolithically grown on Si substrates using InAlAs/GaAs dislocation filter layers

Mingchu Tang, Siming Chen, Jiang Wu, Qi Jiang, Vitaliy G. Dorogan, Mourad Benamara, Yuriy I. Mazur, Gregory J. Salamo, Alwyn Seeds, and Huiyun Liu
Opt. Express 22(10) 11528-11535 (2014)

More Recommended Articles

References

  • View by:
  • Article Order
  • |
  • Year
  • |
  • Author
  • |
  • Publication
  1. A. W. Fang, H. Park, O. Cohen, R. Jones, M. J. Paniccia, and J. E. Bowers, “Electrically pumped hybrid AlGaInAs-silicon evanescent laser,” Opt. Express 14(20), 9203–9210 (2006).
    [Crossref] [PubMed]
  2. D. Andrijasevic, M. Austerer, A. M. Andrews, P. Klang, W. Schrenk, and G. Strasser, “Hybrid integration of GaAs quantum cascade lasers with Si substrates by thermocompression bonding,” Appl. Phys. Lett. 92(5), 051117 (2008).
    [Crossref]
  3. T. Okumura, T. Maruyama, H. Yonezawa, N. Nishiyama, and S. Arai, “Injection-type GaInAsP-InP-Si distributed-feedback laser directly bonded on silicon-on-insulator substrate,” IEEE Photon. Technol. Lett. 21(5), 283–285 (2009).
    [Crossref]
  4. X. Sun, A. Zadok, M. J. Shearn, K. A. Diest, A. Ghaffari, H. A. Atwater, A. Scherer, and A. Yariv, “Electrically pumped hybrid evanescent Si/InGaAsP lasers,” Opt. Lett. 34(9), 1345–1347 (2009).
    [Crossref] [PubMed]
  5. Y. Arakawa and H. Sakaki, “Multidimensional quantum well laser and temperature dependence of its threshold current,” Appl. Phys. Lett. 40(11), 939–941 (1982).
    [Crossref]
  6. Z. Mi, J. Yang, P. Bhattacharya, and D. L. Huffaker, “Self-organised quantum dots as dislocation filters: the case of GaAs-based lasers on silicon,” Electron. Lett. 42(2), 121–122 (2006).
    [Crossref]
  7. K. Tanabe, M. Nomura, D. Guimard, S. Iwamoto, and Y. Arakawa, “Room temperature continuous wave operation of InAs/GaAs quantum dot photonic crystal nanocavity laser on silicon substrate,” Opt. Express 17(9), 7036–7042 (2009).
    [Crossref] [PubMed]
  8. D. Guimard, M. Ishida, L. Li, M. Nishioka, Y. Tanaka, H. Sudo, T. Yamamoto, H. Kondo, M. Sugawara, and Y. Arakawa, “Interface properties of InAs quantum dots produced by antimony surfactant-mediated growth: etching of segregated antimony and its impact on the photoluminescence and lasing characteristics,” Appl. Phys. Lett. 94(10), 103116 (2009).
    [Crossref]
  9. H. C. Lin, K. L. Chang, K. C. Hsieh, K. Y. Cheng, and W. H. Wang, “Metallic wafer bonding for the fabrication of long-wavelength vertical-cavity surface-emitting lasers,” J. Appl. Phys. 92(7), 4132–4134 (2002).
    [Crossref]
  10. E. E. L. Friedrich, M. G. Oberg, B. Broberg, S. Nilsson, and S. Valette, “Hybrid integration of semiconductor lasers with Si-based single-mode ridge waveguides,” J. Lightwave Technol. 10(3), 336–340 (1992).
    [Crossref]
  11. J. A. Dionne, L. A. Sweatlock, H. A. Atwater, and A. Polman, “Plasmon slot waveguides: Towards chip-scale propagation with subwavelength-scale localization,” Phys. Rev. B 73(3), 035407 (2006).
    [Crossref]
  12. M. T. Hill, M. Marell, E. S. P. Leong, B. Smalbrugge, Y. Zhu, M. Sun, P. J. van Veldhoven, E. J. Geluk, F. Karouta, Y. S. Oei, R. Nötzel, C. Z. Ning, and M. K. Smit, “Lasing in metal-insulator-metal sub-wavelength plasmonic waveguides,” Opt. Express 17(13), 11107–11112 (2009).
    [Crossref] [PubMed]

2009 (5)

T. Okumura, T. Maruyama, H. Yonezawa, N. Nishiyama, and S. Arai, “Injection-type GaInAsP-InP-Si distributed-feedback laser directly bonded on silicon-on-insulator substrate,” IEEE Photon. Technol. Lett. 21(5), 283–285 (2009).
[Crossref]

D. Guimard, M. Ishida, L. Li, M. Nishioka, Y. Tanaka, H. Sudo, T. Yamamoto, H. Kondo, M. Sugawara, and Y. Arakawa, “Interface properties of InAs quantum dots produced by antimony surfactant-mediated growth: etching of segregated antimony and its impact on the photoluminescence and lasing characteristics,” Appl. Phys. Lett. 94(10), 103116 (2009).
[Crossref]

K. Tanabe, M. Nomura, D. Guimard, S. Iwamoto, and Y. Arakawa, “Room temperature continuous wave operation of InAs/GaAs quantum dot photonic crystal nanocavity laser on silicon substrate,” Opt. Express 17(9), 7036–7042 (2009).
[Crossref] [PubMed]

X. Sun, A. Zadok, M. J. Shearn, K. A. Diest, A. Ghaffari, H. A. Atwater, A. Scherer, and A. Yariv, “Electrically pumped hybrid evanescent Si/InGaAsP lasers,” Opt. Lett. 34(9), 1345–1347 (2009).
[Crossref] [PubMed]

M. T. Hill, M. Marell, E. S. P. Leong, B. Smalbrugge, Y. Zhu, M. Sun, P. J. van Veldhoven, E. J. Geluk, F. Karouta, Y. S. Oei, R. Nötzel, C. Z. Ning, and M. K. Smit, “Lasing in metal-insulator-metal sub-wavelength plasmonic waveguides,” Opt. Express 17(13), 11107–11112 (2009).
[Crossref] [PubMed]

2008 (1)

D. Andrijasevic, M. Austerer, A. M. Andrews, P. Klang, W. Schrenk, and G. Strasser, “Hybrid integration of GaAs quantum cascade lasers with Si substrates by thermocompression bonding,” Appl. Phys. Lett. 92(5), 051117 (2008).
[Crossref]

2006 (3)

Z. Mi, J. Yang, P. Bhattacharya, and D. L. Huffaker, “Self-organised quantum dots as dislocation filters: the case of GaAs-based lasers on silicon,” Electron. Lett. 42(2), 121–122 (2006).
[Crossref]

J. A. Dionne, L. A. Sweatlock, H. A. Atwater, and A. Polman, “Plasmon slot waveguides: Towards chip-scale propagation with subwavelength-scale localization,” Phys. Rev. B 73(3), 035407 (2006).
[Crossref]

A. W. Fang, H. Park, O. Cohen, R. Jones, M. J. Paniccia, and J. E. Bowers, “Electrically pumped hybrid AlGaInAs-silicon evanescent laser,” Opt. Express 14(20), 9203–9210 (2006).
[Crossref] [PubMed]

2002 (1)

H. C. Lin, K. L. Chang, K. C. Hsieh, K. Y. Cheng, and W. H. Wang, “Metallic wafer bonding for the fabrication of long-wavelength vertical-cavity surface-emitting lasers,” J. Appl. Phys. 92(7), 4132–4134 (2002).
[Crossref]

1992 (1)

E. E. L. Friedrich, M. G. Oberg, B. Broberg, S. Nilsson, and S. Valette, “Hybrid integration of semiconductor lasers with Si-based single-mode ridge waveguides,” J. Lightwave Technol. 10(3), 336–340 (1992).
[Crossref]

1982 (1)

Y. Arakawa and H. Sakaki, “Multidimensional quantum well laser and temperature dependence of its threshold current,” Appl. Phys. Lett. 40(11), 939–941 (1982).
[Crossref]

Andrews, A. M.

D. Andrijasevic, M. Austerer, A. M. Andrews, P. Klang, W. Schrenk, and G. Strasser, “Hybrid integration of GaAs quantum cascade lasers with Si substrates by thermocompression bonding,” Appl. Phys. Lett. 92(5), 051117 (2008).
[Crossref]

Andrijasevic, D.

D. Andrijasevic, M. Austerer, A. M. Andrews, P. Klang, W. Schrenk, and G. Strasser, “Hybrid integration of GaAs quantum cascade lasers with Si substrates by thermocompression bonding,” Appl. Phys. Lett. 92(5), 051117 (2008).
[Crossref]

Arai, S.

T. Okumura, T. Maruyama, H. Yonezawa, N. Nishiyama, and S. Arai, “Injection-type GaInAsP-InP-Si distributed-feedback laser directly bonded on silicon-on-insulator substrate,” IEEE Photon. Technol. Lett. 21(5), 283–285 (2009).
[Crossref]

Arakawa, Y.

K. Tanabe, M. Nomura, D. Guimard, S. Iwamoto, and Y. Arakawa, “Room temperature continuous wave operation of InAs/GaAs quantum dot photonic crystal nanocavity laser on silicon substrate,” Opt. Express 17(9), 7036–7042 (2009).
[Crossref] [PubMed]

D. Guimard, M. Ishida, L. Li, M. Nishioka, Y. Tanaka, H. Sudo, T. Yamamoto, H. Kondo, M. Sugawara, and Y. Arakawa, “Interface properties of InAs quantum dots produced by antimony surfactant-mediated growth: etching of segregated antimony and its impact on the photoluminescence and lasing characteristics,” Appl. Phys. Lett. 94(10), 103116 (2009).
[Crossref]

Y. Arakawa and H. Sakaki, “Multidimensional quantum well laser and temperature dependence of its threshold current,” Appl. Phys. Lett. 40(11), 939–941 (1982).
[Crossref]

Atwater, H. A.

X. Sun, A. Zadok, M. J. Shearn, K. A. Diest, A. Ghaffari, H. A. Atwater, A. Scherer, and A. Yariv, “Electrically pumped hybrid evanescent Si/InGaAsP lasers,” Opt. Lett. 34(9), 1345–1347 (2009).
[Crossref] [PubMed]

J. A. Dionne, L. A. Sweatlock, H. A. Atwater, and A. Polman, “Plasmon slot waveguides: Towards chip-scale propagation with subwavelength-scale localization,” Phys. Rev. B 73(3), 035407 (2006).
[Crossref]

Austerer, M.

D. Andrijasevic, M. Austerer, A. M. Andrews, P. Klang, W. Schrenk, and G. Strasser, “Hybrid integration of GaAs quantum cascade lasers with Si substrates by thermocompression bonding,” Appl. Phys. Lett. 92(5), 051117 (2008).
[Crossref]

Bhattacharya, P.

Z. Mi, J. Yang, P. Bhattacharya, and D. L. Huffaker, “Self-organised quantum dots as dislocation filters: the case of GaAs-based lasers on silicon,” Electron. Lett. 42(2), 121–122 (2006).
[Crossref]

Bowers, J. E.

Broberg, B.

E. E. L. Friedrich, M. G. Oberg, B. Broberg, S. Nilsson, and S. Valette, “Hybrid integration of semiconductor lasers with Si-based single-mode ridge waveguides,” J. Lightwave Technol. 10(3), 336–340 (1992).
[Crossref]

Chang, K. L.

H. C. Lin, K. L. Chang, K. C. Hsieh, K. Y. Cheng, and W. H. Wang, “Metallic wafer bonding for the fabrication of long-wavelength vertical-cavity surface-emitting lasers,” J. Appl. Phys. 92(7), 4132–4134 (2002).
[Crossref]

Cheng, K. Y.

H. C. Lin, K. L. Chang, K. C. Hsieh, K. Y. Cheng, and W. H. Wang, “Metallic wafer bonding for the fabrication of long-wavelength vertical-cavity surface-emitting lasers,” J. Appl. Phys. 92(7), 4132–4134 (2002).
[Crossref]

Cohen, O.

Diest, K. A.

Dionne, J. A.

J. A. Dionne, L. A. Sweatlock, H. A. Atwater, and A. Polman, “Plasmon slot waveguides: Towards chip-scale propagation with subwavelength-scale localization,” Phys. Rev. B 73(3), 035407 (2006).
[Crossref]

Fang, A. W.

Friedrich, E. E. L.

E. E. L. Friedrich, M. G. Oberg, B. Broberg, S. Nilsson, and S. Valette, “Hybrid integration of semiconductor lasers with Si-based single-mode ridge waveguides,” J. Lightwave Technol. 10(3), 336–340 (1992).
[Crossref]

Geluk, E. J.

Ghaffari, A.

Guimard, D.

K. Tanabe, M. Nomura, D. Guimard, S. Iwamoto, and Y. Arakawa, “Room temperature continuous wave operation of InAs/GaAs quantum dot photonic crystal nanocavity laser on silicon substrate,” Opt. Express 17(9), 7036–7042 (2009).
[Crossref] [PubMed]

D. Guimard, M. Ishida, L. Li, M. Nishioka, Y. Tanaka, H. Sudo, T. Yamamoto, H. Kondo, M. Sugawara, and Y. Arakawa, “Interface properties of InAs quantum dots produced by antimony surfactant-mediated growth: etching of segregated antimony and its impact on the photoluminescence and lasing characteristics,” Appl. Phys. Lett. 94(10), 103116 (2009).
[Crossref]

Hill, M. T.

Hsieh, K. C.

H. C. Lin, K. L. Chang, K. C. Hsieh, K. Y. Cheng, and W. H. Wang, “Metallic wafer bonding for the fabrication of long-wavelength vertical-cavity surface-emitting lasers,” J. Appl. Phys. 92(7), 4132–4134 (2002).
[Crossref]

Huffaker, D. L.

Z. Mi, J. Yang, P. Bhattacharya, and D. L. Huffaker, “Self-organised quantum dots as dislocation filters: the case of GaAs-based lasers on silicon,” Electron. Lett. 42(2), 121–122 (2006).
[Crossref]

Ishida, M.

D. Guimard, M. Ishida, L. Li, M. Nishioka, Y. Tanaka, H. Sudo, T. Yamamoto, H. Kondo, M. Sugawara, and Y. Arakawa, “Interface properties of InAs quantum dots produced by antimony surfactant-mediated growth: etching of segregated antimony and its impact on the photoluminescence and lasing characteristics,” Appl. Phys. Lett. 94(10), 103116 (2009).
[Crossref]

Iwamoto, S.

Jones, R.

Karouta, F.

Klang, P.

D. Andrijasevic, M. Austerer, A. M. Andrews, P. Klang, W. Schrenk, and G. Strasser, “Hybrid integration of GaAs quantum cascade lasers with Si substrates by thermocompression bonding,” Appl. Phys. Lett. 92(5), 051117 (2008).
[Crossref]

Kondo, H.

D. Guimard, M. Ishida, L. Li, M. Nishioka, Y. Tanaka, H. Sudo, T. Yamamoto, H. Kondo, M. Sugawara, and Y. Arakawa, “Interface properties of InAs quantum dots produced by antimony surfactant-mediated growth: etching of segregated antimony and its impact on the photoluminescence and lasing characteristics,” Appl. Phys. Lett. 94(10), 103116 (2009).
[Crossref]

Leong, E. S. P.

Li, L.

D. Guimard, M. Ishida, L. Li, M. Nishioka, Y. Tanaka, H. Sudo, T. Yamamoto, H. Kondo, M. Sugawara, and Y. Arakawa, “Interface properties of InAs quantum dots produced by antimony surfactant-mediated growth: etching of segregated antimony and its impact on the photoluminescence and lasing characteristics,” Appl. Phys. Lett. 94(10), 103116 (2009).
[Crossref]

Lin, H. C.

H. C. Lin, K. L. Chang, K. C. Hsieh, K. Y. Cheng, and W. H. Wang, “Metallic wafer bonding for the fabrication of long-wavelength vertical-cavity surface-emitting lasers,” J. Appl. Phys. 92(7), 4132–4134 (2002).
[Crossref]

Marell, M.

Maruyama, T.

T. Okumura, T. Maruyama, H. Yonezawa, N. Nishiyama, and S. Arai, “Injection-type GaInAsP-InP-Si distributed-feedback laser directly bonded on silicon-on-insulator substrate,” IEEE Photon. Technol. Lett. 21(5), 283–285 (2009).
[Crossref]

Mi, Z.

Z. Mi, J. Yang, P. Bhattacharya, and D. L. Huffaker, “Self-organised quantum dots as dislocation filters: the case of GaAs-based lasers on silicon,” Electron. Lett. 42(2), 121–122 (2006).
[Crossref]

Nilsson, S.

E. E. L. Friedrich, M. G. Oberg, B. Broberg, S. Nilsson, and S. Valette, “Hybrid integration of semiconductor lasers with Si-based single-mode ridge waveguides,” J. Lightwave Technol. 10(3), 336–340 (1992).
[Crossref]

Ning, C. Z.

Nishioka, M.

D. Guimard, M. Ishida, L. Li, M. Nishioka, Y. Tanaka, H. Sudo, T. Yamamoto, H. Kondo, M. Sugawara, and Y. Arakawa, “Interface properties of InAs quantum dots produced by antimony surfactant-mediated growth: etching of segregated antimony and its impact on the photoluminescence and lasing characteristics,” Appl. Phys. Lett. 94(10), 103116 (2009).
[Crossref]

Nishiyama, N.

T. Okumura, T. Maruyama, H. Yonezawa, N. Nishiyama, and S. Arai, “Injection-type GaInAsP-InP-Si distributed-feedback laser directly bonded on silicon-on-insulator substrate,” IEEE Photon. Technol. Lett. 21(5), 283–285 (2009).
[Crossref]

Nomura, M.

Nötzel, R.

Oberg, M. G.

E. E. L. Friedrich, M. G. Oberg, B. Broberg, S. Nilsson, and S. Valette, “Hybrid integration of semiconductor lasers with Si-based single-mode ridge waveguides,” J. Lightwave Technol. 10(3), 336–340 (1992).
[Crossref]

Oei, Y. S.

Okumura, T.

T. Okumura, T. Maruyama, H. Yonezawa, N. Nishiyama, and S. Arai, “Injection-type GaInAsP-InP-Si distributed-feedback laser directly bonded on silicon-on-insulator substrate,” IEEE Photon. Technol. Lett. 21(5), 283–285 (2009).
[Crossref]

Paniccia, M. J.

Park, H.

Polman, A.

J. A. Dionne, L. A. Sweatlock, H. A. Atwater, and A. Polman, “Plasmon slot waveguides: Towards chip-scale propagation with subwavelength-scale localization,” Phys. Rev. B 73(3), 035407 (2006).
[Crossref]

Sakaki, H.

Y. Arakawa and H. Sakaki, “Multidimensional quantum well laser and temperature dependence of its threshold current,” Appl. Phys. Lett. 40(11), 939–941 (1982).
[Crossref]

Scherer, A.

Schrenk, W.

D. Andrijasevic, M. Austerer, A. M. Andrews, P. Klang, W. Schrenk, and G. Strasser, “Hybrid integration of GaAs quantum cascade lasers with Si substrates by thermocompression bonding,” Appl. Phys. Lett. 92(5), 051117 (2008).
[Crossref]

Shearn, M. J.

Smalbrugge, B.

Smit, M. K.

Strasser, G.

D. Andrijasevic, M. Austerer, A. M. Andrews, P. Klang, W. Schrenk, and G. Strasser, “Hybrid integration of GaAs quantum cascade lasers with Si substrates by thermocompression bonding,” Appl. Phys. Lett. 92(5), 051117 (2008).
[Crossref]

Sudo, H.

D. Guimard, M. Ishida, L. Li, M. Nishioka, Y. Tanaka, H. Sudo, T. Yamamoto, H. Kondo, M. Sugawara, and Y. Arakawa, “Interface properties of InAs quantum dots produced by antimony surfactant-mediated growth: etching of segregated antimony and its impact on the photoluminescence and lasing characteristics,” Appl. Phys. Lett. 94(10), 103116 (2009).
[Crossref]

Sugawara, M.

D. Guimard, M. Ishida, L. Li, M. Nishioka, Y. Tanaka, H. Sudo, T. Yamamoto, H. Kondo, M. Sugawara, and Y. Arakawa, “Interface properties of InAs quantum dots produced by antimony surfactant-mediated growth: etching of segregated antimony and its impact on the photoluminescence and lasing characteristics,” Appl. Phys. Lett. 94(10), 103116 (2009).
[Crossref]

Sun, M.

Sun, X.

Sweatlock, L. A.

J. A. Dionne, L. A. Sweatlock, H. A. Atwater, and A. Polman, “Plasmon slot waveguides: Towards chip-scale propagation with subwavelength-scale localization,” Phys. Rev. B 73(3), 035407 (2006).
[Crossref]

Tanabe, K.

Tanaka, Y.

D. Guimard, M. Ishida, L. Li, M. Nishioka, Y. Tanaka, H. Sudo, T. Yamamoto, H. Kondo, M. Sugawara, and Y. Arakawa, “Interface properties of InAs quantum dots produced by antimony surfactant-mediated growth: etching of segregated antimony and its impact on the photoluminescence and lasing characteristics,” Appl. Phys. Lett. 94(10), 103116 (2009).
[Crossref]

Valette, S.

E. E. L. Friedrich, M. G. Oberg, B. Broberg, S. Nilsson, and S. Valette, “Hybrid integration of semiconductor lasers with Si-based single-mode ridge waveguides,” J. Lightwave Technol. 10(3), 336–340 (1992).
[Crossref]

van Veldhoven, P. J.

Wang, W. H.

H. C. Lin, K. L. Chang, K. C. Hsieh, K. Y. Cheng, and W. H. Wang, “Metallic wafer bonding for the fabrication of long-wavelength vertical-cavity surface-emitting lasers,” J. Appl. Phys. 92(7), 4132–4134 (2002).
[Crossref]

Yamamoto, T.

D. Guimard, M. Ishida, L. Li, M. Nishioka, Y. Tanaka, H. Sudo, T. Yamamoto, H. Kondo, M. Sugawara, and Y. Arakawa, “Interface properties of InAs quantum dots produced by antimony surfactant-mediated growth: etching of segregated antimony and its impact on the photoluminescence and lasing characteristics,” Appl. Phys. Lett. 94(10), 103116 (2009).
[Crossref]

Yang, J.

Z. Mi, J. Yang, P. Bhattacharya, and D. L. Huffaker, “Self-organised quantum dots as dislocation filters: the case of GaAs-based lasers on silicon,” Electron. Lett. 42(2), 121–122 (2006).
[Crossref]

Yariv, A.

Yonezawa, H.

T. Okumura, T. Maruyama, H. Yonezawa, N. Nishiyama, and S. Arai, “Injection-type GaInAsP-InP-Si distributed-feedback laser directly bonded on silicon-on-insulator substrate,” IEEE Photon. Technol. Lett. 21(5), 283–285 (2009).
[Crossref]

Zadok, A.

Zhu, Y.

Appl. Phys. Lett. (3)

D. Andrijasevic, M. Austerer, A. M. Andrews, P. Klang, W. Schrenk, and G. Strasser, “Hybrid integration of GaAs quantum cascade lasers with Si substrates by thermocompression bonding,” Appl. Phys. Lett. 92(5), 051117 (2008).
[Crossref]

Y. Arakawa and H. Sakaki, “Multidimensional quantum well laser and temperature dependence of its threshold current,” Appl. Phys. Lett. 40(11), 939–941 (1982).
[Crossref]

D. Guimard, M. Ishida, L. Li, M. Nishioka, Y. Tanaka, H. Sudo, T. Yamamoto, H. Kondo, M. Sugawara, and Y. Arakawa, “Interface properties of InAs quantum dots produced by antimony surfactant-mediated growth: etching of segregated antimony and its impact on the photoluminescence and lasing characteristics,” Appl. Phys. Lett. 94(10), 103116 (2009).
[Crossref]

Electron. Lett. (1)

Z. Mi, J. Yang, P. Bhattacharya, and D. L. Huffaker, “Self-organised quantum dots as dislocation filters: the case of GaAs-based lasers on silicon,” Electron. Lett. 42(2), 121–122 (2006).
[Crossref]

IEEE Photon. Technol. Lett. (1)

T. Okumura, T. Maruyama, H. Yonezawa, N. Nishiyama, and S. Arai, “Injection-type GaInAsP-InP-Si distributed-feedback laser directly bonded on silicon-on-insulator substrate,” IEEE Photon. Technol. Lett. 21(5), 283–285 (2009).
[Crossref]

J. Appl. Phys. (1)

H. C. Lin, K. L. Chang, K. C. Hsieh, K. Y. Cheng, and W. H. Wang, “Metallic wafer bonding for the fabrication of long-wavelength vertical-cavity surface-emitting lasers,” J. Appl. Phys. 92(7), 4132–4134 (2002).
[Crossref]

J. Lightwave Technol. (1)

E. E. L. Friedrich, M. G. Oberg, B. Broberg, S. Nilsson, and S. Valette, “Hybrid integration of semiconductor lasers with Si-based single-mode ridge waveguides,” J. Lightwave Technol. 10(3), 336–340 (1992).
[Crossref]

Opt. Express (3)

Opt. Lett. (1)

Phys. Rev. B (1)

J. A. Dionne, L. A. Sweatlock, H. A. Atwater, and A. Polman, “Plasmon slot waveguides: Towards chip-scale propagation with subwavelength-scale localization,” Phys. Rev. B 73(3), 035407 (2006).
[Crossref]

Cited By

OSA participates in Crossref's Cited-By Linking service. Citing articles from OSA journals and other participating publishers are listed here.

Alert me when this article is cited.


Figures (3)

Fig. 1
Fig. 1 RT photoluminescence spectrum and (inset) 1 × 1 μm atomic force microscope image of the as-grown InAs QDs grown by antimony-mediated MOCVD.

Download Full Size | PPT Slide | PDF

Fig. 2
Fig. 2 (a) Cross-sectional schematic of the fabricated InAs/GaAs QD laser on Si substrate. (b) Cross-sectional scanning electron microscope image of the QD laser structure layer-transferred onto a Si substrate.

Download Full Size | PPT Slide | PDF

Fig. 3
Fig. 3 Light-current characteristics of the laser (CL/CL, pulsed, RT). Insets show the electroluminescence spectra at J = 0.2 and 1.0 kA/cm2.

Download Full Size | PPT Slide | PDF

Metrics