Abstract

We present a surface plasmon resonance (SPR) based multimode fiber sensor with non-golden bimetallic coating. Our detection scheme used, which is capable of measuring the combined effects of SPR-induced birefringence and intensity changes, supported the minimum resolvable refractive index (RI) of 5.8 × 10−6 RIU with the operating RI range of 0.05 to be experimentally obtained at a single wavelength (632.8 nm) without non-spectroscopic techniques. The asymmetric profile of the thickness of the bimetal coating on the fiber core together with the inherent range of incidence angle for multimode propagation also contributed to the wide operating range. The SPR fiber device with the detection scheme demonstrated will be likely to be developed as a real-time label-free and highly sensitive diagnostic device of a wide operating range for biomedical and biochemical applications in a portable format.

© 2014 Optical Society of America

Full Article  |  PDF Article
OSA Recommended Articles
Side-polished multimode fiber biosensor based on surface plasmon resonance with halogen light

Hong-Yu Lin, Woo-Hu Tsai, Yu-Chia Tsao, and Bor-Chiou Sheu
Appl. Opt. 46(5) 800-806 (2007)

Highly sensitive surface plasmon resonance biosensor based on a low-index polymer optical fiber

Shaoqing Cao, Yu Shao, Ying Wang, Tiesheng Wu, Longfei Zhang, Yijian Huang, Feng Zhang, Changrui Liao, Jun He, and Yiping Wang
Opt. Express 26(4) 3988-3994 (2018)

Self-optimized metal coatings for fiber plasmonics by electroless deposition

A. Bialiayeu, C. Caucheteur, N. Ahamad, A. Ianoul, and J. Albert
Opt. Express 19(20) 18742-18753 (2011)

More Recommended Articles

References

  • View by:
  • Article Order
  • |
  • Year
  • |
  • Author
  • |
  • Publication
  1. B. Liedberg, C. Nylander, and I. Lundström, “Surface plasmon resonance for gas detection and biosensing,” Sens. Actuators 4, 299–304 (1983).
    [Crossref]
  2. P. B. Daniels, J. K. Deacon, M. J. Eddowes, and D. Pedley, “Surface plasmon resonance applied to immunosensing,” Sens. Actuators 15, 11–17 (1988).
    [Crossref]
  3. R. C. Jorgenson and S. S. Yee, “A fiber optica chemical sensor based on surface plasmon resonance,” Sens. Actuators B 12, 213–220 (1993).
    [Crossref]
  4. S. Miwa and T. Arakawa, “Selective gas detection by means of surface plasmon resonance sensor,” Thin Solid Films 281, 466–468 (1996).
    [Crossref]
  5. J. Melendez, R. Carr, D. Bartholomew, H. Taneja, S. Yee, C. Jung, and C. Furlong, “Development of a surface plasmon resonance sensor for commercial applications,” Sens. Actuators B Chem. 39, 375–379 (1997).
    [Crossref]
  6. H. P. Chiang, C. W. Chen, J. J. Wu, H. L. Li, T. Y. Lin, F. J. Sánchez, and P. T. Leung, “Effects of temperature on the surface plasmon resonance at a metal-semiconductor interface,” Thin Solid Films 515, 6953–6961 (2007).
    [Crossref]
  7. J. Homola, “Optical fiber sensor based on surface plasmon excitation,” Sens. Actuators B Chem. 29, 401–405 (1995).
    [Crossref]
  8. R. Slavik, J. Homola, and J. Ctyroký, “Miniaturization of fiber optic surface plasmon resonance sensor,” Sens. Actuators B Chem. 51, 311–315 (1998).
    [Crossref]
  9. A. J. C. Tubb, F. P. Payne, R. B. Millington, and C. R. Lowe, “Sing-mode optical fibre surface plasma wave chemical sensor,” Sens. Actuators B 41, 71–79 (1997).
    [Crossref]
  10. R. K. Vema, A. K. Sharma, and B. D. Gupta, “Surface plasmon resonance based tapered fiber optic sensor with different taper profiles,” Opt. Commun. 281, 1486–1491 (2008).
    [Crossref]
  11. R. Slavik, J. Homola, and J. Ctyroký, “Single-mode optical fiber surface plasmon resonance sensor,” Sen. Actuators B Chem. 54, 74–79 (1999).
    [Crossref]
  12. W. B. Lin, N. J. Renault, A. Gagnaire, and H. Gagnaire, “The effects of polarization of the incident light modelling and analysis of a SPR multimode optical fiber sensor,” Sens. Actuators A Phys. 84, 198–204 (2000).
    [Crossref]
  13. E. Fontana, “A novel gold-coated multimode fiber sensor,” IEEE Trans. Microwave Theory Technol. 50, 82–87 (2002).
    [Crossref]
  14. H.-Y. Lin, W.-H. Tsa, Y.-C Tsao, and B.-C Sheu, “Side-polished multimode fiber biosensors based on surface plasmon resonance with halogen light,” Appl. Opt. 46, 800–806 (2007).
    [Crossref] [PubMed]
  15. M. Piliarik, J. Homola, Z. Manikova, and J. Ctyroký, “Surface plasmon resonance based on a single mode polarization maintaining optical fiber,” Sens. Actuators B Chem. 90, 236–242 (2003).
    [Crossref]
  16. M. H. Chiu, C. H. Shih, and M. H. Chi, “Optimum sensitivity of single mode D-type optical fiber sensor in the intensity measurement,” Sens. Actuators B Chem. 123, 1120–1124 (2007).
    [Crossref]
  17. M. Mitsushio, K. Miyashita, and M. Higo, “Sensor properties and surface characterization of the metal-deposited SPR optical fiber sensors with Au, Ag, Cu and Al,” Sens. Actuators A 125, 296–303 (2006).
    [Crossref]
  18. A. K. Sharmal and G. J. Mohr, “On the performance of surface plasmon resonance based fibre optic sensor with different bimetallic nanoparticle alloy combinations,” J. Phys. D Appl. Phys. 41, 055106 (2008).
    [Crossref]
  19. B. D. Gupta and A. K. Sharma, “Sensitivity evaluation of a multi-layered surface plasmon resonance-based fiber optic sensor: a theoretical study,” Sens. Actuators B Chem. 107, 40–46 (2005).
    [Crossref]
  20. A. A. Kruchinin and Y. G. Vlasov, “Surface plasmon resonance monitoring by means of polarization state measurement in reflected light as the basis of a DNA-probe biosensor,” Sens. Actuators B 30, 77–80 (1996).
    [Crossref]
  21. R. C. Weast, ed., CRC Handbook of Chemistry and Physics, 68 (CRC Press, 1987), p. D-232.
  22. S. G. Nelson, K. S. Johnston, and S. S. Yee, “High sensitivity surface plasmon resonance sensor based on phase detection,” Sens. Actuators B Chem. 35, 187–191 (1996).
    [Crossref]
  23. S. Y. Wu, H. P. Ho, W. C. Law, C. L. Lin, and S. K. Kong, “Highly sensitive differential phase-sensitive surface plasmon resonance biosensor based on the Mach-Zehnder configuration,” Opt. Lett. 29, 2378–2380 (2004).
    [Crossref] [PubMed]
  24. J. Dostálek, J. Čtyroký, J. Homola, E. Brynda, M. Skalský, P. Nekvindová, J. Spirková, J. Skvor, and J. Schröfel, “Surface plasmon resonance biosensor based on integrated optical waveguide,” Sens. Actuators B 76, 8–12 (2001).
    [Crossref]
  25. M. Zourob, S. Mohr, B. J. T. Brown, P. R. Fielden, M. B. McDonnell, and N. J. Goddard, “Bacteria detection using disposable optical leaky waveguide sensors,” Biosens. Bioelectr. 21, 293–302 (2005).
    [Crossref]
  26. J.-G. Huang, C.-L. Lee, H.-M. Lin, T.-L. Chuang, W.-S. Wang, R.-H. Juang, C.-H. Wang, and C. K. Lee, “A miniaturized germanium-doped silicon dioxide-based surface plasmon resonance waveguide sensor for immunoassay detection,” Biosens. Bioelectr. 22, 519–525 (2006).
    [Crossref]

2008 (2)

R. K. Vema, A. K. Sharma, and B. D. Gupta, “Surface plasmon resonance based tapered fiber optic sensor with different taper profiles,” Opt. Commun. 281, 1486–1491 (2008).
[Crossref]

A. K. Sharmal and G. J. Mohr, “On the performance of surface plasmon resonance based fibre optic sensor with different bimetallic nanoparticle alloy combinations,” J. Phys. D Appl. Phys. 41, 055106 (2008).
[Crossref]

2007 (3)

H.-Y. Lin, W.-H. Tsa, Y.-C Tsao, and B.-C Sheu, “Side-polished multimode fiber biosensors based on surface plasmon resonance with halogen light,” Appl. Opt. 46, 800–806 (2007).
[Crossref] [PubMed]

M. H. Chiu, C. H. Shih, and M. H. Chi, “Optimum sensitivity of single mode D-type optical fiber sensor in the intensity measurement,” Sens. Actuators B Chem. 123, 1120–1124 (2007).
[Crossref]

H. P. Chiang, C. W. Chen, J. J. Wu, H. L. Li, T. Y. Lin, F. J. Sánchez, and P. T. Leung, “Effects of temperature on the surface plasmon resonance at a metal-semiconductor interface,” Thin Solid Films 515, 6953–6961 (2007).
[Crossref]

2006 (2)

M. Mitsushio, K. Miyashita, and M. Higo, “Sensor properties and surface characterization of the metal-deposited SPR optical fiber sensors with Au, Ag, Cu and Al,” Sens. Actuators A 125, 296–303 (2006).
[Crossref]

J.-G. Huang, C.-L. Lee, H.-M. Lin, T.-L. Chuang, W.-S. Wang, R.-H. Juang, C.-H. Wang, and C. K. Lee, “A miniaturized germanium-doped silicon dioxide-based surface plasmon resonance waveguide sensor for immunoassay detection,” Biosens. Bioelectr. 22, 519–525 (2006).
[Crossref]

2005 (2)

B. D. Gupta and A. K. Sharma, “Sensitivity evaluation of a multi-layered surface plasmon resonance-based fiber optic sensor: a theoretical study,” Sens. Actuators B Chem. 107, 40–46 (2005).
[Crossref]

M. Zourob, S. Mohr, B. J. T. Brown, P. R. Fielden, M. B. McDonnell, and N. J. Goddard, “Bacteria detection using disposable optical leaky waveguide sensors,” Biosens. Bioelectr. 21, 293–302 (2005).
[Crossref]

2004 (1)

2003 (1)

M. Piliarik, J. Homola, Z. Manikova, and J. Ctyroký, “Surface plasmon resonance based on a single mode polarization maintaining optical fiber,” Sens. Actuators B Chem. 90, 236–242 (2003).
[Crossref]

2002 (1)

E. Fontana, “A novel gold-coated multimode fiber sensor,” IEEE Trans. Microwave Theory Technol. 50, 82–87 (2002).
[Crossref]

2001 (1)

J. Dostálek, J. Čtyroký, J. Homola, E. Brynda, M. Skalský, P. Nekvindová, J. Spirková, J. Skvor, and J. Schröfel, “Surface plasmon resonance biosensor based on integrated optical waveguide,” Sens. Actuators B 76, 8–12 (2001).
[Crossref]

2000 (1)

W. B. Lin, N. J. Renault, A. Gagnaire, and H. Gagnaire, “The effects of polarization of the incident light modelling and analysis of a SPR multimode optical fiber sensor,” Sens. Actuators A Phys. 84, 198–204 (2000).
[Crossref]

1999 (1)

R. Slavik, J. Homola, and J. Ctyroký, “Single-mode optical fiber surface plasmon resonance sensor,” Sen. Actuators B Chem. 54, 74–79 (1999).
[Crossref]

1998 (1)

R. Slavik, J. Homola, and J. Ctyroký, “Miniaturization of fiber optic surface plasmon resonance sensor,” Sens. Actuators B Chem. 51, 311–315 (1998).
[Crossref]

1997 (2)

A. J. C. Tubb, F. P. Payne, R. B. Millington, and C. R. Lowe, “Sing-mode optical fibre surface plasma wave chemical sensor,” Sens. Actuators B 41, 71–79 (1997).
[Crossref]

J. Melendez, R. Carr, D. Bartholomew, H. Taneja, S. Yee, C. Jung, and C. Furlong, “Development of a surface plasmon resonance sensor for commercial applications,” Sens. Actuators B Chem. 39, 375–379 (1997).
[Crossref]

1996 (3)

S. Miwa and T. Arakawa, “Selective gas detection by means of surface plasmon resonance sensor,” Thin Solid Films 281, 466–468 (1996).
[Crossref]

A. A. Kruchinin and Y. G. Vlasov, “Surface plasmon resonance monitoring by means of polarization state measurement in reflected light as the basis of a DNA-probe biosensor,” Sens. Actuators B 30, 77–80 (1996).
[Crossref]

S. G. Nelson, K. S. Johnston, and S. S. Yee, “High sensitivity surface plasmon resonance sensor based on phase detection,” Sens. Actuators B Chem. 35, 187–191 (1996).
[Crossref]

1995 (1)

J. Homola, “Optical fiber sensor based on surface plasmon excitation,” Sens. Actuators B Chem. 29, 401–405 (1995).
[Crossref]

1993 (1)

R. C. Jorgenson and S. S. Yee, “A fiber optica chemical sensor based on surface plasmon resonance,” Sens. Actuators B 12, 213–220 (1993).
[Crossref]

1988 (1)

P. B. Daniels, J. K. Deacon, M. J. Eddowes, and D. Pedley, “Surface plasmon resonance applied to immunosensing,” Sens. Actuators 15, 11–17 (1988).
[Crossref]

1983 (1)

B. Liedberg, C. Nylander, and I. Lundström, “Surface plasmon resonance for gas detection and biosensing,” Sens. Actuators 4, 299–304 (1983).
[Crossref]

Arakawa, T.

S. Miwa and T. Arakawa, “Selective gas detection by means of surface plasmon resonance sensor,” Thin Solid Films 281, 466–468 (1996).
[Crossref]

Bartholomew, D.

J. Melendez, R. Carr, D. Bartholomew, H. Taneja, S. Yee, C. Jung, and C. Furlong, “Development of a surface plasmon resonance sensor for commercial applications,” Sens. Actuators B Chem. 39, 375–379 (1997).
[Crossref]

Brown, B. J. T.

M. Zourob, S. Mohr, B. J. T. Brown, P. R. Fielden, M. B. McDonnell, and N. J. Goddard, “Bacteria detection using disposable optical leaky waveguide sensors,” Biosens. Bioelectr. 21, 293–302 (2005).
[Crossref]

Brynda, E.

J. Dostálek, J. Čtyroký, J. Homola, E. Brynda, M. Skalský, P. Nekvindová, J. Spirková, J. Skvor, and J. Schröfel, “Surface plasmon resonance biosensor based on integrated optical waveguide,” Sens. Actuators B 76, 8–12 (2001).
[Crossref]

Carr, R.

J. Melendez, R. Carr, D. Bartholomew, H. Taneja, S. Yee, C. Jung, and C. Furlong, “Development of a surface plasmon resonance sensor for commercial applications,” Sens. Actuators B Chem. 39, 375–379 (1997).
[Crossref]

Chen, C. W.

H. P. Chiang, C. W. Chen, J. J. Wu, H. L. Li, T. Y. Lin, F. J. Sánchez, and P. T. Leung, “Effects of temperature on the surface plasmon resonance at a metal-semiconductor interface,” Thin Solid Films 515, 6953–6961 (2007).
[Crossref]

Chi, M. H.

M. H. Chiu, C. H. Shih, and M. H. Chi, “Optimum sensitivity of single mode D-type optical fiber sensor in the intensity measurement,” Sens. Actuators B Chem. 123, 1120–1124 (2007).
[Crossref]

Chiang, H. P.

H. P. Chiang, C. W. Chen, J. J. Wu, H. L. Li, T. Y. Lin, F. J. Sánchez, and P. T. Leung, “Effects of temperature on the surface plasmon resonance at a metal-semiconductor interface,” Thin Solid Films 515, 6953–6961 (2007).
[Crossref]

Chiu, M. H.

M. H. Chiu, C. H. Shih, and M. H. Chi, “Optimum sensitivity of single mode D-type optical fiber sensor in the intensity measurement,” Sens. Actuators B Chem. 123, 1120–1124 (2007).
[Crossref]

Chuang, T.-L.

J.-G. Huang, C.-L. Lee, H.-M. Lin, T.-L. Chuang, W.-S. Wang, R.-H. Juang, C.-H. Wang, and C. K. Lee, “A miniaturized germanium-doped silicon dioxide-based surface plasmon resonance waveguide sensor for immunoassay detection,” Biosens. Bioelectr. 22, 519–525 (2006).
[Crossref]

Ctyroký, J.

M. Piliarik, J. Homola, Z. Manikova, and J. Ctyroký, “Surface plasmon resonance based on a single mode polarization maintaining optical fiber,” Sens. Actuators B Chem. 90, 236–242 (2003).
[Crossref]

J. Dostálek, J. Čtyroký, J. Homola, E. Brynda, M. Skalský, P. Nekvindová, J. Spirková, J. Skvor, and J. Schröfel, “Surface plasmon resonance biosensor based on integrated optical waveguide,” Sens. Actuators B 76, 8–12 (2001).
[Crossref]

R. Slavik, J. Homola, and J. Ctyroký, “Single-mode optical fiber surface plasmon resonance sensor,” Sen. Actuators B Chem. 54, 74–79 (1999).
[Crossref]

R. Slavik, J. Homola, and J. Ctyroký, “Miniaturization of fiber optic surface plasmon resonance sensor,” Sens. Actuators B Chem. 51, 311–315 (1998).
[Crossref]

Daniels, P. B.

P. B. Daniels, J. K. Deacon, M. J. Eddowes, and D. Pedley, “Surface plasmon resonance applied to immunosensing,” Sens. Actuators 15, 11–17 (1988).
[Crossref]

Deacon, J. K.

P. B. Daniels, J. K. Deacon, M. J. Eddowes, and D. Pedley, “Surface plasmon resonance applied to immunosensing,” Sens. Actuators 15, 11–17 (1988).
[Crossref]

Dostálek, J.

J. Dostálek, J. Čtyroký, J. Homola, E. Brynda, M. Skalský, P. Nekvindová, J. Spirková, J. Skvor, and J. Schröfel, “Surface plasmon resonance biosensor based on integrated optical waveguide,” Sens. Actuators B 76, 8–12 (2001).
[Crossref]

Eddowes, M. J.

P. B. Daniels, J. K. Deacon, M. J. Eddowes, and D. Pedley, “Surface plasmon resonance applied to immunosensing,” Sens. Actuators 15, 11–17 (1988).
[Crossref]

Fielden, P. R.

M. Zourob, S. Mohr, B. J. T. Brown, P. R. Fielden, M. B. McDonnell, and N. J. Goddard, “Bacteria detection using disposable optical leaky waveguide sensors,” Biosens. Bioelectr. 21, 293–302 (2005).
[Crossref]

Fontana, E.

E. Fontana, “A novel gold-coated multimode fiber sensor,” IEEE Trans. Microwave Theory Technol. 50, 82–87 (2002).
[Crossref]

Furlong, C.

J. Melendez, R. Carr, D. Bartholomew, H. Taneja, S. Yee, C. Jung, and C. Furlong, “Development of a surface plasmon resonance sensor for commercial applications,” Sens. Actuators B Chem. 39, 375–379 (1997).
[Crossref]

Gagnaire, A.

W. B. Lin, N. J. Renault, A. Gagnaire, and H. Gagnaire, “The effects of polarization of the incident light modelling and analysis of a SPR multimode optical fiber sensor,” Sens. Actuators A Phys. 84, 198–204 (2000).
[Crossref]

Gagnaire, H.

W. B. Lin, N. J. Renault, A. Gagnaire, and H. Gagnaire, “The effects of polarization of the incident light modelling and analysis of a SPR multimode optical fiber sensor,” Sens. Actuators A Phys. 84, 198–204 (2000).
[Crossref]

Goddard, N. J.

M. Zourob, S. Mohr, B. J. T. Brown, P. R. Fielden, M. B. McDonnell, and N. J. Goddard, “Bacteria detection using disposable optical leaky waveguide sensors,” Biosens. Bioelectr. 21, 293–302 (2005).
[Crossref]

Gupta, B. D.

R. K. Vema, A. K. Sharma, and B. D. Gupta, “Surface plasmon resonance based tapered fiber optic sensor with different taper profiles,” Opt. Commun. 281, 1486–1491 (2008).
[Crossref]

B. D. Gupta and A. K. Sharma, “Sensitivity evaluation of a multi-layered surface plasmon resonance-based fiber optic sensor: a theoretical study,” Sens. Actuators B Chem. 107, 40–46 (2005).
[Crossref]

Higo, M.

M. Mitsushio, K. Miyashita, and M. Higo, “Sensor properties and surface characterization of the metal-deposited SPR optical fiber sensors with Au, Ag, Cu and Al,” Sens. Actuators A 125, 296–303 (2006).
[Crossref]

Ho, H. P.

Homola, J.

M. Piliarik, J. Homola, Z. Manikova, and J. Ctyroký, “Surface plasmon resonance based on a single mode polarization maintaining optical fiber,” Sens. Actuators B Chem. 90, 236–242 (2003).
[Crossref]

J. Dostálek, J. Čtyroký, J. Homola, E. Brynda, M. Skalský, P. Nekvindová, J. Spirková, J. Skvor, and J. Schröfel, “Surface plasmon resonance biosensor based on integrated optical waveguide,” Sens. Actuators B 76, 8–12 (2001).
[Crossref]

R. Slavik, J. Homola, and J. Ctyroký, “Single-mode optical fiber surface plasmon resonance sensor,” Sen. Actuators B Chem. 54, 74–79 (1999).
[Crossref]

R. Slavik, J. Homola, and J. Ctyroký, “Miniaturization of fiber optic surface plasmon resonance sensor,” Sens. Actuators B Chem. 51, 311–315 (1998).
[Crossref]

J. Homola, “Optical fiber sensor based on surface plasmon excitation,” Sens. Actuators B Chem. 29, 401–405 (1995).
[Crossref]

Huang, J.-G.

J.-G. Huang, C.-L. Lee, H.-M. Lin, T.-L. Chuang, W.-S. Wang, R.-H. Juang, C.-H. Wang, and C. K. Lee, “A miniaturized germanium-doped silicon dioxide-based surface plasmon resonance waveguide sensor for immunoassay detection,” Biosens. Bioelectr. 22, 519–525 (2006).
[Crossref]

Johnston, K. S.

S. G. Nelson, K. S. Johnston, and S. S. Yee, “High sensitivity surface plasmon resonance sensor based on phase detection,” Sens. Actuators B Chem. 35, 187–191 (1996).
[Crossref]

Jorgenson, R. C.

R. C. Jorgenson and S. S. Yee, “A fiber optica chemical sensor based on surface plasmon resonance,” Sens. Actuators B 12, 213–220 (1993).
[Crossref]

Juang, R.-H.

J.-G. Huang, C.-L. Lee, H.-M. Lin, T.-L. Chuang, W.-S. Wang, R.-H. Juang, C.-H. Wang, and C. K. Lee, “A miniaturized germanium-doped silicon dioxide-based surface plasmon resonance waveguide sensor for immunoassay detection,” Biosens. Bioelectr. 22, 519–525 (2006).
[Crossref]

Jung, C.

J. Melendez, R. Carr, D. Bartholomew, H. Taneja, S. Yee, C. Jung, and C. Furlong, “Development of a surface plasmon resonance sensor for commercial applications,” Sens. Actuators B Chem. 39, 375–379 (1997).
[Crossref]

Kong, S. K.

Kruchinin, A. A.

A. A. Kruchinin and Y. G. Vlasov, “Surface plasmon resonance monitoring by means of polarization state measurement in reflected light as the basis of a DNA-probe biosensor,” Sens. Actuators B 30, 77–80 (1996).
[Crossref]

Law, W. C.

Lee, C. K.

J.-G. Huang, C.-L. Lee, H.-M. Lin, T.-L. Chuang, W.-S. Wang, R.-H. Juang, C.-H. Wang, and C. K. Lee, “A miniaturized germanium-doped silicon dioxide-based surface plasmon resonance waveguide sensor for immunoassay detection,” Biosens. Bioelectr. 22, 519–525 (2006).
[Crossref]

Lee, C.-L.

J.-G. Huang, C.-L. Lee, H.-M. Lin, T.-L. Chuang, W.-S. Wang, R.-H. Juang, C.-H. Wang, and C. K. Lee, “A miniaturized germanium-doped silicon dioxide-based surface plasmon resonance waveguide sensor for immunoassay detection,” Biosens. Bioelectr. 22, 519–525 (2006).
[Crossref]

Leung, P. T.

H. P. Chiang, C. W. Chen, J. J. Wu, H. L. Li, T. Y. Lin, F. J. Sánchez, and P. T. Leung, “Effects of temperature on the surface plasmon resonance at a metal-semiconductor interface,” Thin Solid Films 515, 6953–6961 (2007).
[Crossref]

Li, H. L.

H. P. Chiang, C. W. Chen, J. J. Wu, H. L. Li, T. Y. Lin, F. J. Sánchez, and P. T. Leung, “Effects of temperature on the surface plasmon resonance at a metal-semiconductor interface,” Thin Solid Films 515, 6953–6961 (2007).
[Crossref]

Liedberg, B.

B. Liedberg, C. Nylander, and I. Lundström, “Surface plasmon resonance for gas detection and biosensing,” Sens. Actuators 4, 299–304 (1983).
[Crossref]

Lin, C. L.

Lin, H.-M.

J.-G. Huang, C.-L. Lee, H.-M. Lin, T.-L. Chuang, W.-S. Wang, R.-H. Juang, C.-H. Wang, and C. K. Lee, “A miniaturized germanium-doped silicon dioxide-based surface plasmon resonance waveguide sensor for immunoassay detection,” Biosens. Bioelectr. 22, 519–525 (2006).
[Crossref]

Lin, H.-Y.

Lin, T. Y.

H. P. Chiang, C. W. Chen, J. J. Wu, H. L. Li, T. Y. Lin, F. J. Sánchez, and P. T. Leung, “Effects of temperature on the surface plasmon resonance at a metal-semiconductor interface,” Thin Solid Films 515, 6953–6961 (2007).
[Crossref]

Lin, W. B.

W. B. Lin, N. J. Renault, A. Gagnaire, and H. Gagnaire, “The effects of polarization of the incident light modelling and analysis of a SPR multimode optical fiber sensor,” Sens. Actuators A Phys. 84, 198–204 (2000).
[Crossref]

Lowe, C. R.

A. J. C. Tubb, F. P. Payne, R. B. Millington, and C. R. Lowe, “Sing-mode optical fibre surface plasma wave chemical sensor,” Sens. Actuators B 41, 71–79 (1997).
[Crossref]

Lundström, I.

B. Liedberg, C. Nylander, and I. Lundström, “Surface plasmon resonance for gas detection and biosensing,” Sens. Actuators 4, 299–304 (1983).
[Crossref]

Manikova, Z.

M. Piliarik, J. Homola, Z. Manikova, and J. Ctyroký, “Surface plasmon resonance based on a single mode polarization maintaining optical fiber,” Sens. Actuators B Chem. 90, 236–242 (2003).
[Crossref]

McDonnell, M. B.

M. Zourob, S. Mohr, B. J. T. Brown, P. R. Fielden, M. B. McDonnell, and N. J. Goddard, “Bacteria detection using disposable optical leaky waveguide sensors,” Biosens. Bioelectr. 21, 293–302 (2005).
[Crossref]

Melendez, J.

J. Melendez, R. Carr, D. Bartholomew, H. Taneja, S. Yee, C. Jung, and C. Furlong, “Development of a surface plasmon resonance sensor for commercial applications,” Sens. Actuators B Chem. 39, 375–379 (1997).
[Crossref]

Millington, R. B.

A. J. C. Tubb, F. P. Payne, R. B. Millington, and C. R. Lowe, “Sing-mode optical fibre surface plasma wave chemical sensor,” Sens. Actuators B 41, 71–79 (1997).
[Crossref]

Mitsushio, M.

M. Mitsushio, K. Miyashita, and M. Higo, “Sensor properties and surface characterization of the metal-deposited SPR optical fiber sensors with Au, Ag, Cu and Al,” Sens. Actuators A 125, 296–303 (2006).
[Crossref]

Miwa, S.

S. Miwa and T. Arakawa, “Selective gas detection by means of surface plasmon resonance sensor,” Thin Solid Films 281, 466–468 (1996).
[Crossref]

Miyashita, K.

M. Mitsushio, K. Miyashita, and M. Higo, “Sensor properties and surface characterization of the metal-deposited SPR optical fiber sensors with Au, Ag, Cu and Al,” Sens. Actuators A 125, 296–303 (2006).
[Crossref]

Mohr, G. J.

A. K. Sharmal and G. J. Mohr, “On the performance of surface plasmon resonance based fibre optic sensor with different bimetallic nanoparticle alloy combinations,” J. Phys. D Appl. Phys. 41, 055106 (2008).
[Crossref]

Mohr, S.

M. Zourob, S. Mohr, B. J. T. Brown, P. R. Fielden, M. B. McDonnell, and N. J. Goddard, “Bacteria detection using disposable optical leaky waveguide sensors,” Biosens. Bioelectr. 21, 293–302 (2005).
[Crossref]

Nekvindová, P.

J. Dostálek, J. Čtyroký, J. Homola, E. Brynda, M. Skalský, P. Nekvindová, J. Spirková, J. Skvor, and J. Schröfel, “Surface plasmon resonance biosensor based on integrated optical waveguide,” Sens. Actuators B 76, 8–12 (2001).
[Crossref]

Nelson, S. G.

S. G. Nelson, K. S. Johnston, and S. S. Yee, “High sensitivity surface plasmon resonance sensor based on phase detection,” Sens. Actuators B Chem. 35, 187–191 (1996).
[Crossref]

Nylander, C.

B. Liedberg, C. Nylander, and I. Lundström, “Surface plasmon resonance for gas detection and biosensing,” Sens. Actuators 4, 299–304 (1983).
[Crossref]

Payne, F. P.

A. J. C. Tubb, F. P. Payne, R. B. Millington, and C. R. Lowe, “Sing-mode optical fibre surface plasma wave chemical sensor,” Sens. Actuators B 41, 71–79 (1997).
[Crossref]

Pedley, D.

P. B. Daniels, J. K. Deacon, M. J. Eddowes, and D. Pedley, “Surface plasmon resonance applied to immunosensing,” Sens. Actuators 15, 11–17 (1988).
[Crossref]

Piliarik, M.

M. Piliarik, J. Homola, Z. Manikova, and J. Ctyroký, “Surface plasmon resonance based on a single mode polarization maintaining optical fiber,” Sens. Actuators B Chem. 90, 236–242 (2003).
[Crossref]

Renault, N. J.

W. B. Lin, N. J. Renault, A. Gagnaire, and H. Gagnaire, “The effects of polarization of the incident light modelling and analysis of a SPR multimode optical fiber sensor,” Sens. Actuators A Phys. 84, 198–204 (2000).
[Crossref]

Sánchez, F. J.

H. P. Chiang, C. W. Chen, J. J. Wu, H. L. Li, T. Y. Lin, F. J. Sánchez, and P. T. Leung, “Effects of temperature on the surface plasmon resonance at a metal-semiconductor interface,” Thin Solid Films 515, 6953–6961 (2007).
[Crossref]

Schröfel, J.

J. Dostálek, J. Čtyroký, J. Homola, E. Brynda, M. Skalský, P. Nekvindová, J. Spirková, J. Skvor, and J. Schröfel, “Surface plasmon resonance biosensor based on integrated optical waveguide,” Sens. Actuators B 76, 8–12 (2001).
[Crossref]

Sharma, A. K.

R. K. Vema, A. K. Sharma, and B. D. Gupta, “Surface plasmon resonance based tapered fiber optic sensor with different taper profiles,” Opt. Commun. 281, 1486–1491 (2008).
[Crossref]

B. D. Gupta and A. K. Sharma, “Sensitivity evaluation of a multi-layered surface plasmon resonance-based fiber optic sensor: a theoretical study,” Sens. Actuators B Chem. 107, 40–46 (2005).
[Crossref]

Sharmal, A. K.

A. K. Sharmal and G. J. Mohr, “On the performance of surface plasmon resonance based fibre optic sensor with different bimetallic nanoparticle alloy combinations,” J. Phys. D Appl. Phys. 41, 055106 (2008).
[Crossref]

Sheu, B.-C

Shih, C. H.

M. H. Chiu, C. H. Shih, and M. H. Chi, “Optimum sensitivity of single mode D-type optical fiber sensor in the intensity measurement,” Sens. Actuators B Chem. 123, 1120–1124 (2007).
[Crossref]

Skalský, M.

J. Dostálek, J. Čtyroký, J. Homola, E. Brynda, M. Skalský, P. Nekvindová, J. Spirková, J. Skvor, and J. Schröfel, “Surface plasmon resonance biosensor based on integrated optical waveguide,” Sens. Actuators B 76, 8–12 (2001).
[Crossref]

Skvor, J.

J. Dostálek, J. Čtyroký, J. Homola, E. Brynda, M. Skalský, P. Nekvindová, J. Spirková, J. Skvor, and J. Schröfel, “Surface plasmon resonance biosensor based on integrated optical waveguide,” Sens. Actuators B 76, 8–12 (2001).
[Crossref]

Slavik, R.

R. Slavik, J. Homola, and J. Ctyroký, “Single-mode optical fiber surface plasmon resonance sensor,” Sen. Actuators B Chem. 54, 74–79 (1999).
[Crossref]

R. Slavik, J. Homola, and J. Ctyroký, “Miniaturization of fiber optic surface plasmon resonance sensor,” Sens. Actuators B Chem. 51, 311–315 (1998).
[Crossref]

Spirková, J.

J. Dostálek, J. Čtyroký, J. Homola, E. Brynda, M. Skalský, P. Nekvindová, J. Spirková, J. Skvor, and J. Schröfel, “Surface plasmon resonance biosensor based on integrated optical waveguide,” Sens. Actuators B 76, 8–12 (2001).
[Crossref]

Taneja, H.

J. Melendez, R. Carr, D. Bartholomew, H. Taneja, S. Yee, C. Jung, and C. Furlong, “Development of a surface plasmon resonance sensor for commercial applications,” Sens. Actuators B Chem. 39, 375–379 (1997).
[Crossref]

Tsa, W.-H.

Tsao, Y.-C

Tubb, A. J. C.

A. J. C. Tubb, F. P. Payne, R. B. Millington, and C. R. Lowe, “Sing-mode optical fibre surface plasma wave chemical sensor,” Sens. Actuators B 41, 71–79 (1997).
[Crossref]

Vema, R. K.

R. K. Vema, A. K. Sharma, and B. D. Gupta, “Surface plasmon resonance based tapered fiber optic sensor with different taper profiles,” Opt. Commun. 281, 1486–1491 (2008).
[Crossref]

Vlasov, Y. G.

A. A. Kruchinin and Y. G. Vlasov, “Surface plasmon resonance monitoring by means of polarization state measurement in reflected light as the basis of a DNA-probe biosensor,” Sens. Actuators B 30, 77–80 (1996).
[Crossref]

Wang, C.-H.

J.-G. Huang, C.-L. Lee, H.-M. Lin, T.-L. Chuang, W.-S. Wang, R.-H. Juang, C.-H. Wang, and C. K. Lee, “A miniaturized germanium-doped silicon dioxide-based surface plasmon resonance waveguide sensor for immunoassay detection,” Biosens. Bioelectr. 22, 519–525 (2006).
[Crossref]

Wang, W.-S.

J.-G. Huang, C.-L. Lee, H.-M. Lin, T.-L. Chuang, W.-S. Wang, R.-H. Juang, C.-H. Wang, and C. K. Lee, “A miniaturized germanium-doped silicon dioxide-based surface plasmon resonance waveguide sensor for immunoassay detection,” Biosens. Bioelectr. 22, 519–525 (2006).
[Crossref]

Wu, J. J.

H. P. Chiang, C. W. Chen, J. J. Wu, H. L. Li, T. Y. Lin, F. J. Sánchez, and P. T. Leung, “Effects of temperature on the surface plasmon resonance at a metal-semiconductor interface,” Thin Solid Films 515, 6953–6961 (2007).
[Crossref]

Wu, S. Y.

Yee, S.

J. Melendez, R. Carr, D. Bartholomew, H. Taneja, S. Yee, C. Jung, and C. Furlong, “Development of a surface plasmon resonance sensor for commercial applications,” Sens. Actuators B Chem. 39, 375–379 (1997).
[Crossref]

Yee, S. S.

S. G. Nelson, K. S. Johnston, and S. S. Yee, “High sensitivity surface plasmon resonance sensor based on phase detection,” Sens. Actuators B Chem. 35, 187–191 (1996).
[Crossref]

R. C. Jorgenson and S. S. Yee, “A fiber optica chemical sensor based on surface plasmon resonance,” Sens. Actuators B 12, 213–220 (1993).
[Crossref]

Zourob, M.

M. Zourob, S. Mohr, B. J. T. Brown, P. R. Fielden, M. B. McDonnell, and N. J. Goddard, “Bacteria detection using disposable optical leaky waveguide sensors,” Biosens. Bioelectr. 21, 293–302 (2005).
[Crossref]

Appl. Opt. (1)

Biosens. Bioelectr. (2)

M. Zourob, S. Mohr, B. J. T. Brown, P. R. Fielden, M. B. McDonnell, and N. J. Goddard, “Bacteria detection using disposable optical leaky waveguide sensors,” Biosens. Bioelectr. 21, 293–302 (2005).
[Crossref]

J.-G. Huang, C.-L. Lee, H.-M. Lin, T.-L. Chuang, W.-S. Wang, R.-H. Juang, C.-H. Wang, and C. K. Lee, “A miniaturized germanium-doped silicon dioxide-based surface plasmon resonance waveguide sensor for immunoassay detection,” Biosens. Bioelectr. 22, 519–525 (2006).
[Crossref]

IEEE Trans. Microwave Theory Technol. (1)

E. Fontana, “A novel gold-coated multimode fiber sensor,” IEEE Trans. Microwave Theory Technol. 50, 82–87 (2002).
[Crossref]

J. Phys. D Appl. Phys. (1)

A. K. Sharmal and G. J. Mohr, “On the performance of surface plasmon resonance based fibre optic sensor with different bimetallic nanoparticle alloy combinations,” J. Phys. D Appl. Phys. 41, 055106 (2008).
[Crossref]

Opt. Commun. (1)

R. K. Vema, A. K. Sharma, and B. D. Gupta, “Surface plasmon resonance based tapered fiber optic sensor with different taper profiles,” Opt. Commun. 281, 1486–1491 (2008).
[Crossref]

Opt. Lett. (1)

Sen. Actuators B Chem. (1)

R. Slavik, J. Homola, and J. Ctyroký, “Single-mode optical fiber surface plasmon resonance sensor,” Sen. Actuators B Chem. 54, 74–79 (1999).
[Crossref]

Sens. Actuators (2)

B. Liedberg, C. Nylander, and I. Lundström, “Surface plasmon resonance for gas detection and biosensing,” Sens. Actuators 4, 299–304 (1983).
[Crossref]

P. B. Daniels, J. K. Deacon, M. J. Eddowes, and D. Pedley, “Surface plasmon resonance applied to immunosensing,” Sens. Actuators 15, 11–17 (1988).
[Crossref]

Sens. Actuators A (1)

M. Mitsushio, K. Miyashita, and M. Higo, “Sensor properties and surface characterization of the metal-deposited SPR optical fiber sensors with Au, Ag, Cu and Al,” Sens. Actuators A 125, 296–303 (2006).
[Crossref]

Sens. Actuators A Phys. (1)

W. B. Lin, N. J. Renault, A. Gagnaire, and H. Gagnaire, “The effects of polarization of the incident light modelling and analysis of a SPR multimode optical fiber sensor,” Sens. Actuators A Phys. 84, 198–204 (2000).
[Crossref]

Sens. Actuators B (4)

A. J. C. Tubb, F. P. Payne, R. B. Millington, and C. R. Lowe, “Sing-mode optical fibre surface plasma wave chemical sensor,” Sens. Actuators B 41, 71–79 (1997).
[Crossref]

R. C. Jorgenson and S. S. Yee, “A fiber optica chemical sensor based on surface plasmon resonance,” Sens. Actuators B 12, 213–220 (1993).
[Crossref]

A. A. Kruchinin and Y. G. Vlasov, “Surface plasmon resonance monitoring by means of polarization state measurement in reflected light as the basis of a DNA-probe biosensor,” Sens. Actuators B 30, 77–80 (1996).
[Crossref]

J. Dostálek, J. Čtyroký, J. Homola, E. Brynda, M. Skalský, P. Nekvindová, J. Spirková, J. Skvor, and J. Schröfel, “Surface plasmon resonance biosensor based on integrated optical waveguide,” Sens. Actuators B 76, 8–12 (2001).
[Crossref]

Sens. Actuators B Chem. (7)

S. G. Nelson, K. S. Johnston, and S. S. Yee, “High sensitivity surface plasmon resonance sensor based on phase detection,” Sens. Actuators B Chem. 35, 187–191 (1996).
[Crossref]

J. Melendez, R. Carr, D. Bartholomew, H. Taneja, S. Yee, C. Jung, and C. Furlong, “Development of a surface plasmon resonance sensor for commercial applications,” Sens. Actuators B Chem. 39, 375–379 (1997).
[Crossref]

J. Homola, “Optical fiber sensor based on surface plasmon excitation,” Sens. Actuators B Chem. 29, 401–405 (1995).
[Crossref]

R. Slavik, J. Homola, and J. Ctyroký, “Miniaturization of fiber optic surface plasmon resonance sensor,” Sens. Actuators B Chem. 51, 311–315 (1998).
[Crossref]

B. D. Gupta and A. K. Sharma, “Sensitivity evaluation of a multi-layered surface plasmon resonance-based fiber optic sensor: a theoretical study,” Sens. Actuators B Chem. 107, 40–46 (2005).
[Crossref]

M. Piliarik, J. Homola, Z. Manikova, and J. Ctyroký, “Surface plasmon resonance based on a single mode polarization maintaining optical fiber,” Sens. Actuators B Chem. 90, 236–242 (2003).
[Crossref]

M. H. Chiu, C. H. Shih, and M. H. Chi, “Optimum sensitivity of single mode D-type optical fiber sensor in the intensity measurement,” Sens. Actuators B Chem. 123, 1120–1124 (2007).
[Crossref]

Thin Solid Films (2)

H. P. Chiang, C. W. Chen, J. J. Wu, H. L. Li, T. Y. Lin, F. J. Sánchez, and P. T. Leung, “Effects of temperature on the surface plasmon resonance at a metal-semiconductor interface,” Thin Solid Films 515, 6953–6961 (2007).
[Crossref]

S. Miwa and T. Arakawa, “Selective gas detection by means of surface plasmon resonance sensor,” Thin Solid Films 281, 466–468 (1996).
[Crossref]

Other (1)

R. C. Weast, ed., CRC Handbook of Chemistry and Physics, 68 (CRC Press, 1987), p. D-232.

Cited By

OSA participates in Crossref's Cited-By Linking service. Citing articles from OSA journals and other participating publishers are listed here.

Alert me when this article is cited.


Figures (5)

Fig. 1
Fig. 1 (a) Metal vapor deposition on the exposed core surface of the clad-free optical fiber. (b) Expected cross-section of the metal coating profile on the fiber core after the bimetallic deposition for SPR.

Download Full Size | PPT Slide | PDF

Fig. 2
Fig. 2 Schematic of the experimental setup for analyte solution sensing. λ/4 and λ/2 represent a quarter- and a half-wave plates, respectively, PBS denotes a polarizing beam splitter, and BD a balanced detector.

Download Full Size | PPT Slide | PDF

Fig. 3
Fig. 3 Sensing of glycerol concentration (volume to volume ratio) for the fiber device with no metal coating.

Download Full Size | PPT Slide | PDF

Fig. 4
Fig. 4 Sensing of glycerol concentration (volume to volume ratio) for different ratios of Ag and Al coating thicknesses.

Download Full Size | PPT Slide | PDF

Fig. 5
Fig. 5 glycerol concentration (volume to volume ratio) sensing by measurement of optical power at the fiber output.

Download Full Size | PPT Slide | PDF

Equations (6)

Equations on this page are rendered with MathJax. Learn more.

k ex l = ω c Re [ ε m ε d ε m + ε d ] ,
E d ( r ) = E d ( 0 ) e − r k s p 2 − k d 2 ,
[ E out H E out V ] = ( R ( − ξ ) [ e − i Γ / 2 0 0 e i Γ / 2 ] R ( ξ ) ) [ 1 ± i ] ,
[ E λ / 2 , out H E λ / 2 , out V ] = i [ − cos 2 ψ sin 2 ψ sin 2 ψ cos 2 ψ ] [ E out H E out V ] ,
[ I H I V ] = [ ( I out / 2 ) ( 1 − sin Γ sin ( 2 ξ − 4 ψ ) ) ( I out / 2 ) ( 1 + sin Γ sin ( 2 ξ − 4 ψ ) ) ] ,
S ≡ max ( I − ) − min ( I − ) = 2 I out sin Γ .

Metrics